TABLE OF CONTENTS Components Installation Operation Navigation Standard and Advanced Menu Settings Welcome Page and Home Page Menu Structure What dose is being delivered? How long has my lamp been running? How long has my system been running? What alarms are currently present? What alarms have occurred? How many more days should my lamp last? How can I reset the lamp run hours after installing a new lamp?
COMPONENTS COMMcenter Part #650623-001 (includes parts #602942 and 602982) RJ45 (Ethernet) cable Part #602942 (not exactly as shown) RJ11 to RS232 adapter Part #602982 Purchased separately: To connect multiple units: RJ45 cable(s). Available from Trojan and retailers. One is provided with each COMMcenter. •...
Set the time and date on the COMMcenter (refer to page 11). If data-logging is desired, insert mini-SD card or connect to computer using MAXtrack software (free; to learn more, visit http://protour.trojanuv.com). For details, refer to "Data-logging" section. Installations involving multiple units Up to 9 units may be linked to the COMMcenter.
OPERATION Navigation There are four buttons on the COMMcenter. Their function corresponds to what is displayed on the screen next to each button, as illustrated below. This button does not have an Use this button to move up assigned function on this screen. through options.
What dose is being delivered? How long has my lamp been running? How long has my system been running? One screen for each unit, up to a maximum of 9. Navigate between units using buttons on the right. If only one unit is present, this is the Home page.
What alarms are currently present? What alarms have occurred? Alarms must first be acknowledged by pressing The COMMcenter stores the last 40 alarms that any button on the COMMcenter or by pressing have occurred in memory. For greater data-logging the Mute button on the power supply. This does capability, including the ability to data-log dose, not remove the alarm condition.
How many more days should How can I reset the lamp run hours my lamp last? after installing a new lamp? Note: the "Lamp Hours" screens may only be The lamp run hours can also be reset at the power viewed when in Advanced Menus mode.
How do I set the time? How do I set the date? The COMMcenter is equipped with a battery that The COMMcenter is equipped with a battery that will allow it to track the time for the life of the will allow it to track the date for the life of the product.
How do I permanently remove a unit? How do I reset all addresses? This procedure resets the address for one unit to This procedure resets the addresses of all units "zero", and the COMMcenter will no longer track to "zero". Use this only after consulting with Trojan this unit.
How do I remove a unit? How do I re-install a unit? When this procedure is followed, the unit that is Use this procedure when a unit that was previously removed is no longer tracked by the COMMcenter. removed from service (ex: back-up system) needs Use this procedure when removing a unit from to be returned to service.
How do I turn off a unit for servicing? How do I turn a unit on after servicing? This procedure provides a two hour window during This procedure triggers the COMMcenter to which the COMMcenter no longer tracks the resume tracking the unit specified. Note that if this specified unit.
DATA-LOGGING: USING A MINI-SD CARD Your COMMcenter has the ability to store data on the performance of your system(s) to a mini-SD card, such as the one pictured below. Mini-SD cards are available at various retailers. Information is recorded every minute and a 512MB card should store 18 years worth of information. To use this data-logging feature, simply insert a mini-SD card into the slot on the left side of the COMMcenter.
Connect the adapter to your computer. If no suitable port is available, a USB adapter may be purchsed from a retailer. Go to http://protour.trojanuv.com and download your free MAXtrack software. Open the software application now installed on your computer, either from the shortcut on your desktop or by choosing "Start"...
To obtain help under this warranty, contact the Trojan Technical Support Center at 1-800-265-5774 (North America), 519-457-3400 (International) or by email at residential@trojanuv.com. Please have available the serial number, date of purchase, the name of the dealer from whom you purchased your Trojan product (“the source dealer”), as well as a description of the problem you are experiencing.
Need help?
Do you have a question about the Trojanuvmax pro series and is the answer not in the manual?
Questions and answers