General Homeline THE-1 Instruction Manual

Rotary laser

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

T H E - 1

R O T A R Y L A S E R

I N S T R U C T I O N

M A N U A L

Table of Contents

Need help?

Do you have a question about the THE-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for General Homeline THE-1

Page 1 T H E - 1 R O T A R Y L A S E R I N S T R U C T I O N M A N U A L...
Page 2 SAFETY Read the following safety instructions before ▪ Tool service must be performed only by attempting to operate this product. qualified repair personnel. Repairs, service Keep these instructions in a safe place or store or maintenance performed by unqualified in the carry case for future reference. personnel will void the warranty.
Page 3 WARNING: DO NOT DISASSEMBLE ▪ Do not set up the tool at a position where THE LASER. There are no user serviceable the laser beam can cross any person at head height. parts inside. Disassembling the laser will ▪ Do not let children come in contact with the void all warranties on the product.
Page 4: Item Checklist
ITEM CHECKLIST Please ensure the following items are included with your laser level. If anything is missing please contact your retailer. General Homeline THE-1 Detector & clamp Tripod & staff INCHES Carry case Alkaline Laser glasses Laser target batteries...
Page 5 LASER OVERVIEW (FRONT) Protective lighthouse Rotating laser port Control panel...
Page 6 LASER OVERVIEW (BASE) 5/8” x 11 thread for horizontal operation on a tripod Battery thumb screw...
Page 7 LASER CONTROL PANEL Counter clockwise rotation Clockwise rotation Scanning mode Speed control Tilt alarm Tilt alarm indicator Speed control indicator Power indicator Power...
Page 8: Detector Overview
DETECTOR OVERVIEW LCD display screen Sound on / off Laser sensor Coarse / fine detection Power Speaker...
Page 9: Using Your Laser
USING YOUR LASER POWER SUPPLY Inserting the alkaline batteries Alkaline batteries ▪ Loosen the battery thumb screw on the ▪ The instrument is supplied with four base of the instrument and remove the C-cell alkaline batteries battery tray. ▪ Insert the batteries according to polarity. ▪...
Page 10 HORIZONTAL MEASUREMENT SET UP Level surface set up Tripod set up ▪ Select a place as close and practical ▪ Select a place as close and practical to the work site as possible, and ensure to the work site as possible, and ensure that the location is clear of traffic.
Page 11 OPERATION VERTICAL MEASUREMENT SET UP Powering on Level surface set up ▪ Press the power button once and the ▪ Select a place as close and practical to instrument will power begin the work site as possible, and ensure that automatically self-levelling.
Page 12 Speed control Rotation direction ▪ Press the speed control button to cycle ▪ Whilst the instrument is in scanning mode through various rotational speeds. press the clockwise or counter clockwise button to change the rotation of the laser ▪ The speed control indicator will flash head.
Page 13 USING YOUR DETECTOR ▪ Switch the detector on by pressing the power button. The speaker will beep once indicating the instrument is operating. ▪ The LCD screen will display the battery level, detection mode and speaker function. ▪ To change between coarse and fine mode press the coarse / fine mode button ▪...
Page 14: Checking Calibration
CHECKING CALIBRATION Before doing any precision levelling it is ▪ The difference should be within 6mm at 30m. advised to check the calibration of the ▪ If the instrument is out of calibration it is instrument. advised to send it in to Spot-on. (see www.spoton.com.au for details) ▪...
Page 15: Troubleshooting
TROUBLE SHOOTING Error Cause & Solution Laser does not ▪ Check the batteries. They may be in the wrong way or need replacing. turn on ▪ Check the battery compartment for signs of damage. Ensure they are clean and not bent. ▪...
Page 16: Care And Maintenance
CARE AND MAINTENANCE ▪ Reflective surfaces such as glass may reflect ▪ The operator should check the accuracy the beam, causing two beams to strike the of the instrument before precision levelling detector at the same time. This may create is attempted.
Page 17: Warranty
WARRANTY The General Homeline THE-1 comes with a 1 (one) year manufacturers warranty. AUSTRALIA NEW ZEALAND “Our goods come with guarantees that For more information please visit cannot be excluded under the Australian consumerprotection.govt.nz Consumer Law. You are entitled to a...
Page 18: Customer Support
CUSTOMER SUPPORT To assist you with any queries or technical questions please contact customer support Australia: 1300 658 338 New Zealand: 0800 367 527...
Page 19: Specifications
SPECIFICATIONS Specifications General Homeline THE-1 Product code 70002 Warranty 1 Year Accuracy ±3mm at 30m Operating range 300m (diameter) Levelling range ±9% / ±5° Laser class 2 Red Battery life 20 hours Battery type 4x C IP rating Weight (kg) 1.85...
Page 20 www. s p o to n. c o m .a u...