Extreme Networks A3 MK II Instruction Manual page 22

OPERATION (continued)
Setting up a dial-in grade /slope
▪ To create a dial-in grade / slope, press the
dial-in grade mode button on the remote
control. The remote control will show the
dial-in function with the X-axis selected.
▪ To set a grade / slope percentage on the
X-axis, press the + or - grade adjustment
buttons on the remote control to change
to the desired
negative). When the required grade / slope
percentage has been selected, press the
grade adjustment button to change to the
Y-axis. If you do not wish to set a grade
on this axis, press the grade adjustment
button to change straight to the Y-axis.
22
number (positive
▪ To set a grade / slope percentage on the
Y-axis, press the + or - grade adjustment
buttons on the remote control to change
to the
negative). When the required grade / slope
percentage has been selected, press the
grade adjustment button. If you do not
wish to set a grade on this axis, press the
grade adjustment button to complete the
or
dial-in grade / slope operation.
▪ The instrument will now adjust to your
selected grade(s) / slope(s).
▪ To change a selected grade / slope, press
the grade adjustment button to cancel the
grade / slope operation and press again to
begin set up again.
desired number (positive or