Barmat Castings PORTO Instruction Manual page 8

INSTRUCTION MANUAL – Cast iron stove PORTO
Excessive draught Excessive
Excessive Excessive
Poor quality Poor Poor Poor
Smoke release Smoke release Cold flue outlet Cold flue outlet
Smoke release Smoke release Cold flue outlet Cold flue outlet
Insufficient draught Insufficient draught Insufficient draught Insufficient draught
Negative pressure in the Negative pressure in the
Negative pressure in the Negative pressure in the
chimney chimney chimney chimney
Low heat output Low heat output Low heat output Low heat output Poor quality wood Poor quality wood Poor quality wood Poor quality wood
Problems with hot air Problems Problems Problems
circulation circulation circulation circulation
draught
Install an additional draught regulation in a
•
draught
draught draught
connector pipe
quality wood quality quality wood wood wood After starting a fire it is strictly forbidden to
•
use small pieces of wood.
You must not use processed wood,
•
chipboards, pallets, waste wood or damp wood
Use
•
extensive fire and fire hazard
To heat the flue outlet light the fire in the
•
burning chamber with a ball of paper
Verify a flue condition. Make sure it is
•
clean, not obstructed and properly installed.
Install outside air intake in the chimney
•
Use a hard wood logs characterized by
•
high
hornbeam
with hot air with hot air with hot air Check the air circulation in all parts of the
•
air flow system (air inlet, air regulators, air
circulation devices, air outlet etc.)
Make sure that adjoining rooms are
•
equipped with ventilation grids to allow hot air
circulation
7
of forbidden fuels may
calorific value, i.e oak, beech
cause
or