Always keep the top cover of Tactivo connected when using the device. Do not allow Tactivo to get in contact with water or other fl uids. If this happens immediately remove Tactivo from the device and let it dry thoroughly.
Windows/OS X for secure authentica- tion using the smart card. Remove the mobile device from the Tactivo. Connect the Tactivo to the Windows or OS X device using the micro-USB to USB cable included with the Tactivo. Windows devices install drivers automatically.
7.1 Correct Finger Placement 7.2 Enhance Fingerprint Image Quality If your fi nger is very dry: Correct and consistent fi nger placement is crucial for good performance. Try to press more fi rmly when swiping. Breathe on your fi nger. If your fi nger is very damp: Try to press less fi rmly when swiping.
Page 6
FCC Information (USA) Tactivo should be used exclusively with supported iPad models. Do not Tactivo for iPad (4th generation) (P/N SAA 123 1011) complies with Part 15 (Class B) connect it to any other device. of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference Do not bend or twist the micro USB cable while connected to Tactivo.
Page 7
11. Environment RoHS compliant WEEE compliant The top cover is recyclable plastics The black bottom piece should be recycled as an electrical waste iPad is a trademark of Apple Inc., registered in the U.S. and other countries. Made for iPad and Lightning are trademarks of Apple Inc.
Need help?
Do you have a question about the TACTIVO and is the answer not in the manual?
Questions and answers