1. Manuals
  2. Brands
  3. Sky Wing Manuals
  4. Receiver
  5. BTI-025
  6. User manual

Sky Wing BTI-025 User Manual

Wireless transmitter receiver 2-in-1 adapter
Hide thumbs
Table of Contents

Advertisement

Quick Links

BTI-025 User Manual
Wireless Transmitter Receiver 2-in-1 Adapter
Contents

1. Product Overview

2.1. Bluetooth Pairing & Connection
3.1. Bluetooth Pairing & Connection
6. Important Notices & FAQ
1. Product Overview

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BTI-025 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sky Wing BTI-025

  • Page 1 2. As a Bluetooth Transmitter 2.1. Bluetooth Pairing & Connection 2.2. Connect to two Bluetooth headphones/speakers simultaneously 2.3. Connect BTI-025 to TV or other audio source 3. As a Bluetooth Receiver 3.1. Bluetooth Pairing & Connection 3.2. Connect to two phones/tablets simultaneously 4.

  • Page 2: As A Bluetooth Transmitter

    2. As a Bluetooth Transmitter 2.1. Bluetooth Pairing & Connection Step 1. From off, slide TX/RX switch to TX position. Then turn on BTI-025 – press and hold MFB button for 3 seconds. Step 2. Enter PAIRING MODE – double click MFB, the LED flashes BLUE very quickly.

  • Page 3: Connect To Two Bluetooth Headphones/Speakers Simultaneously

    Step 5. Turn on the first device and BTI-025 again, wait for 5~30 seconds, BTI- 025 will automatically connect to two devices. Note: If BTI-025 can’t re-connect to two devices, please try to turn it off and on again. 2.3. Connect BTI-025 to TV or other audio source Connect BTI-025 to your TV or other analog audio source via 3.5mm audio cable.

  • Page 4: As A Bluetooth Receiver

    Step 2. Set BTI-025 to PAIRING MODE again – double click MFB, the LED flashes BLUE and RED alternately. Step 3. Activate Bluetooth on your second phone/tablet, search and select “Avantree BTI-025” to connect. Step 4. Turn off BTI-025 and turn on again. It will automatically connect to two devices simultaneously.

  • Page 5: Charging

    Charging Requirement You can connect BTI-025 via the supplied micro USB cable to your own USB chargers (wall charger/travel charger/car charger, etc.) with 5V/500mA-1A or PC USB port. It’s ok to use most mobile phone chargers on the market.

  • Page 6: Important Notices & Faq

    6. Important Notices & FAQ 1). AptX Low Latency BTI-025 just support aptX low latency in TX mode. In this mode, if you still experiencing audio delay, it is most likely due to your headphones/receiver without Low Latency Support. Due to aptX technology limitation, aptX Low Latency codec does NOT support under dual link.

Table of Contents