Download
Share
Print this page
  1. Manuals
  2. Brands
  3. proSmart Manuals
  4. Thermostat
  5. BBoil
  6. User manual

proSmart BBoil User Manual

Hide thumbs Also See for BBoil:

Advertisement

Quick Links

Download this manual
Manufacturer:
Pro Smart Ltd
78 Maestro Kanev Str.
1618 Sofia, Bulgaria
bboilrf.com/en

Advertisement

loading
Need help?

Need help?

Do you have a question about the BBoil and is the answer not in the manual?

Questions and answers

Related Manuals for proSmart BBoil

Summary of Contents for proSmart BBoil

  • Page 1 Manufacturer: Pro Smart Ltd 78 Maestro Kanev Str. 1618 Sofia, Bulgaria bboilrf.com/en...
  • Page 3 The technology set in BBoil allows џ The product: џ it to connect with any wireless BBoil is a Wi-Fi programmable џ Internet, without the need of any thermostat controller. The device is addi onal se ngs. an Internet connected relayed BBoil is a complex system with џ...
  • Page 4 Flexible work modes – thermostat and on/off џ Work with up to four wireless sensors џ Work with up to four wireless sensors for BBoil RF and four wired ones џ for BBoil Classic. BBoil could be used for: Control of electric water heaters џ...

  • Page 5: Technical Specification

    Technical specification...
  • Page 6 Programme Turned off Weekly schedule work Manually set temperature Upper and lower hysteresis (set by the user in the outlined ranges) Max. 230V~; 16 А (4 A inductive load) 100-240V~ 50/60Hz 35mА Т45 Central charging block Central block – consumption Central block –...
  • Page 7 5% till 90% without condense Main unit fuse FF1 T 250mA 250V 35A F1 IH 0,30A IT 0,60A U 30V Imax 10A Wireless temperature sensor’s fuse 0,1s max Overvoltage category Chain type SELV Wireless communication Network topology * It concerns the BBoil RF modification...

  • Page 8: Safety Instructions

    Safety instructions Please, read before using the device for the first time The outlined safety procedures below are to be followed while using the current product. Please, do follow all warnings in the device’s user manual. General safety instructions You are the only one responsible for the device’s usage, as well as for any caused damages in consequence of that.
  • Page 9 national and regional legislations are followed. The device is to be installed in electric switchboards or in the device/s it will manage and is created to control household devices and equipment. Any unauthorised reconstruction and/or product modification is strictly forbidden following the European safety and approval directives (CE). The device works at supply voltage of 100-240V~/50/60 Hz.
  • Page 10 Do not leave children with the device without supervision! Do not let children play with the device. They cannot properly assess the danger of using electric devices. The device is not intended for use by individuals (including children) with limited physical, sensory or mental capabilities or without any experience and/or knowledge unless they are controlled by an individual responsible for their safety or have received instructions on how to use it.
  • Page 11 Dangerous environment limitation usages Do not use this device in gas stations, gas storages, chemical plants or in places where flow blasting is taking place, locations with potentially explosive environment, for instance in places such as fueling areas, gas storages, ship holds, chemical plants, in installations for fuel or chemical transportation or storage and in zones where the air contains chemicals or particles such as grain, dust or metal particles.
  • Page 12 damaged or has visible overheating traces. Even though you are following the user manual, the device is not working correctly. Do not expose it to heating or in a close proximity to a heating source, such as radiators, thermal accumulators, furnices or other equipments (including amplifiers) that emit heat.
  • Page 13 This product is in accordance of the regulations in Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its recasts. Burns and fire prevention Do not use the device if the premises’...
  • Page 14 BBoil is a programmable thermostat controller set up to work with a wired or wireless temperature sensor. It is suitable for building and home installa ons, without the need of addi onal wiring. The wireless sensor communicates directly with BBoil, sending real me informa on regarding the recorded temperature in the premises, where it is installed.
  • Page 15 BBoil is created to work on the following environmental conditions: For premises’ work; For altitude up to 2000m; For ambient temperature from 0°С till +45°С; For average maximum air humidity for temperature of up to 31°С - 80%, linear decreasing to 30% average humidity for 45°С temperature;...

  • Page 16: Installation Guide

    Installation guide Step 1: Scheme 1a 1.1 Every BBoil RF set includes: 1 pcs central control block; 1 pcs wireless temperature sensor; 1 pcs user manual for installa on and usage; Unpack the device and take the two main elements out of the box (Scheme 1a).
  • Page 17 (Scheme 1b). Scheme 1b A en on! Switch off the power supply before installing BBoil RF. We highly recommend the installa on to be performed by a qualified technician. If you do not possess the needed knowledge and qualifica on, please do turn to an authorised retailer! A en on! Do not modify or influence the built in protec on of the electric...
  • Page 18 The device can be used for control of electric devices and appliances, heating systems or low-current systems that allow interruption of input fuse or are controlled by normally open/normally closed circle. The BBoil‘s thermostat can easily connect to every gas/pellet boiler or other heating system that has a double core connector for room thermostat.
  • Page 19 Bboil RF could be used as a room thermostat. For that type of installation the temperature sensor is positioned in the premise where the temperature is to be measured. Scheme 2b shows an example of a BBoil Classic connec on to an electrical boiler.
  • Page 20 ‘Login’ into the system. 1.3 Central control block’s installa on Connect the power supply cable to the BBoil’s main control block. A er that, connect it to the power supply (Scheme 3). 1.4 Installa on possibili es...
  • Page 21 1.5 A few requirements must always be considered and followed during installa on: The device’s installa on and connec on must be accomplished according to the na onal legisla on for electrical installa ons. All ac vi es on the device’s installa on, uninstalla on, service and repair are to be made only a er it had been securely removed from the power supply (the controller itself, as well as the chain it controls through the relayed exit).
  • Page 22 All connec ons to the relay’s outputs in the device must be conducted with conductors with an insula on resistance not lower than that of the insulated conductors of РVС Т 105°С. The device’s installa on is conducted by the manufacturer’s instruc ons and following the НD 60364-4-41 requirements, as well as the na onal legisla on.
  • Page 23 Step 2: Temperature sensor connec on and usage. If you have BBoil Classic, please proceed to step 2.2 2.1 If you have BBoil RF, unscrew the four screws from the wireless sensor and remove the bo om lid. Then, place 2xAA alkaline ba eries (LR6 type) in the ba eries holder (Scheme 5).
  • Page 24 Install BBoil RF’s main block, as instructed in Sec on 1.3. џ Enter the BBoil RF central block’s ‘Se ngs’ mode via pressing and holding џ the bu on for three seconds. When in Se ngs mode the light emi ng...
  • Page 25 Press the temperature sensor’s bu on once (Scheme 7). This way the · temperature sensor goes to ‘Se ngs’ mode for 30 seconds during which me the light emi ng diode will be blinking every second. Once both devices are in Se ngs mode, press the main block’s bu on ·...
  • Page 26 Place the wireless sensor’s lid and screw the four screws. · A er the successful pairing of the two elements, they start working · normally. If the two elements do not successfully pair with one another during the · 30 seconds in which the temperature sensor is in ‘Se ngs’ mode, it con nues to work upon the previously set se ngs.
  • Page 27 In order for the device to work properly, it must be connected to an Internet network. A er the installa on’s finished, provide a supply voltage to the device and BBoil. Wait 10 seconds, press and hold the bu on for three seconds and follow the device’s light indica on.
  • Page 28 Wi-Fi network where BBoil will be opera ng Open the proSmart mobile app on your smartphone or tablet. If you s ll do not have the mobile app installed, you can download it from Google Play store,...
  • Page 29 Log in to your profile with your email and password. If this is your first BBoil device purchased and you have not registered yet, you can do that in proSmart’s webpage: h ps://bboilrf.com/en Press the ‘Add’ bu on for adding a new device, marked with a ‘+’ sign and located in the upper hand side of the screen.
  • Page 30 Take a look at the blue light emi ng diode and when its light goes off, and then stays on permanently, BBoil is all set up for work. Look at the mobile device’s screen. The app is now ready to control BBoil. If you have used ProSmart Config mode, please proceed to Step 4.
  • Page 31 3.2.1 Ini ate a wireless network search from your smartphone or laptop and connect to the BBoil’s AP (the wireless network) Every device creates a network with its own name, star ng with BBoil_xxx and a combina on of le ers and numbers.
  • Page 32 3.2.4. Choose the desired Wi-Fi network, type in your password and click on the ‘Connect’ bu on - Scheme 12 3.2.5. In up to 20 seconds BBoil will switch to a working mode and the light indicator will be on all the me, blinking shortly per every second.
  • Page 33 4.1 Once connected to the Internet, BBoil becomes invisible to the other devices in the network. The only way to connect with BBoil is via the user profile, associated with the par cular device. If you do not have one, you can load the proSmart’s page: h ps://bboilrf.com/en or download and install the...
  • Page 34 4.2 If you choose to use a browser, open h ps://bboilrf.com/en in your PC desktop or mobile device and press the ‘Log in’ bu on in the upper right corner (Scheme 13). Scheme 13 4.3 If you access the website or the app for the first me, you need to register or log in with your Facebook or Google + accounts just by clicking the par cular bu on.
  • Page 35 4.4 New user registra on. Fill in the registra on form’s fields and click the ‘Register’ bu on. You are now registered and may enter the app. (Scheme 15). Scheme 15...
  • Page 36 5.1 Home Screen —A er the successful login with username and password, you should already be seeing the home screen in your profile and can add the device you have received. Enter the serial number of your BBoil device that you previously connected to the wireless network (Scheme 16).
  • Page 37 Scheme 17 In order to set a name for your device, as well as a me zone and loca on, press the bu on in the upper right corner and fill in the fields (Scheme 18). From that window you can also delete the device from your profile via clicking the dele on bu on in the bo om right corner.
  • Page 38 Off - the device is not working • Manual - the device is on and working un l • BBoil RF's battery status reaching the set temperature from the right slider Scheme 19 Schedule - the device follows the set •...
  • Page 39 A er the desired temperature is reached, BBoil automa cally comes back to its normal work (Scheme 20).
  • Page 40 6.2 General scheme on Settings screen Scheme 21 In the ‘Se ngs’ page, you can locate the two sliders for the Upper and Lower hysteresis. Their main purpose is keeping the set temperature with the highest possible energy savings and extending the electrical appliance’s life.
  • Page 41 In the General menu you can find the Scheme 22 relay’s working modes: Thermostat – Default mode with active thermostat function. BBoil monitors џ the temperature and manages the controlled device. ON / OFF – Temperature monitoring mode and with a turned off thermostat џ...
  • Page 42 ‘0.0’. In the field With the ‘Emergency mode value’ you can set the desired temperature that the device would maintain for the BBoil’s manual turn on through the hardware button (please look at Scheme 6). This turn on/off method is used in the case...
  • Page 43 6.3 In the ‘Schedule page, you can see a form for se ng a weekly schedule for ’ autonomous control of the connected device to BBoil. Scheme 24a shows an example of an empty schedule on a laptop’s browser, and Scheme 24b - on a smartphone.
  • Page 44 6.3.1 Press the axis on the desired day of the week. On the window that opens up, you can locate the bu ons for spli ng the set period – the day is split in two there is also a drop down menu for turning the chosen period on and off. When it is turned on, you see a slider for se ng the desired temperature for that period.
  • Page 45 6.4 This is an example of a weekly schedule’s view on a laptop (Scheme 26a) and on a smartphone (Scheme 26b). Scheme 26b Scheme 26a Important! We highly recommend to always update your browser to the latest version. The use of outdated browser versions could cause issues with the user interface’s func ons.
  • Page 46 Step 7: Addi onal temperature sensors’ connec on. If you have a BBoil Classic device, please proceed to Step 8. 7.1 BBoil RF can work with up to four wireless temperature sensors in the same me. In order to add one or more wireless sensors, unscrew the temperature sensor’s four screws and remove the bo om lid (Scheme 5).
  • Page 47 Following the posi on outlined in Scheme 28, place the switches depending on which following sensor you are connec ng. In order to pair the wireless temperature sensor to the main controlling block, follow the steps as explained in point 2.1. Fourth First Second...
  • Page 48 Scheme 29 Step 8: Servicing of BBoil 8.1 BBoil is cleaned with a dry or slightly dampened with water towel. The use of aggressive or abrasive cleaning liquids is strictly forbidden. 8.2 The condi on of the terminals, terminal connec ons, as well as the connec on reliability of external wires needs to be checked every six months, and strengthened if needed.

  • Page 49: Warranty

    Warranty The warranty of the device is 24 months from the date of purchase. The serial number of the BBoil device is unique and you need to present it in the event of a problem during the warranty period. The warranty will not be recognized if any of the following events occur: •...
  • Page 50 The Wi-Fi programmable thermostat BBoil complies to all of the following standards and regula ons: EU EMC 2014/30/EU, LVD 2014/35/EU, RED 2014/53/EU, WEEE 2012/19/EU and the RoHS 2011/65/EU. BDS ЕN 55022:2010 (CISPR 22:2008); BDS ЕN 55024:2010 (CISPR 24:2010); BDS EN 55016-2-3:2010+А1:2010 (CISPR 16-2-3:2010+А1:2010);...