FMS Trace 2K Series | Hardware Installation Manual Table of Contents INTRODUCTION FEATURES & BENEFITS APPLICATIONS RECORDING FUNCTION ACCESSORIES PRODUCT DESCRIPTION GPRS SPECIFICATION GPS SPECIFICATION FMS RFID DRIVER ACCESS CARD TECHNICAL SPECIFICATION WIRE CONNECTION TEST STATION SIDE - CONNECTOR PIN OUT TRACE TO TEST STATION CABLE MATCHING TABLE p.
Driver Identification (RFID). The FMS Trace 2K employs the FMS Tech. latest onboard device configuration and settings. All settings and device configurations including hardware or software settings for all events, thresholds, tolerance, etc., seamlessly with minimal efforts; just require an internet connection.
FMS Trace 2K Series | Hardware Installation Manual Applications The FMS Trace 2K was designed to dramatically reduce cost, power, and size, while significantly improve device reliability in the field. Recording Function Analog and digital sensors Speed via GPS Remote immobilization function Driver ID Over speeding Remote configuration...
FMS Trace 2K Series | Hardware Installation Manual Wire Connection Figure 1: Wire Diagram Color Description Wire Length Power ( Vehicle Battery ) 2.5 meter Yellow / Green line RS485-B (RFID Antenna) 30 CM Gray RS232 - Data in 2.5 meter Yellow RS232 - Data out 2.5 meter...
FMS Trace 2K Series | Hardware Installation Manual Figure 2: Female connector PIN Test Station Side-Connector Pin out Color Description Brown Power (Vehicle Ground) Power (Vehicle Battery) White/Violet line Ignition - A/D In1 White/Red line A/D In2 Or External Output 2 White/Green line A/D In3 Or Relay White/Yellow line...