Connecting Other Video Components - Pioneer VSX-416-K Operating Instructions Manual

04 Connecting up
Microsoft, Windows Media
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Connecting other video
components
This receiver has audio/video inputs and
outputs suitable for connecting analog or
digital video recorders, including VCRs, DVD-
recorders and HDD recorders.
1 Connect a set of audio/video outputs on
the recorder to the DVR/VCR AUDIO and
VIDEO inputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
2 Connect a set of audio/video inputs on
the recorder to the DVR/VCR AUDIO and
VIDEO outputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
3 If your video component has a digital
audio output, connect it to a digital input on
this receiver.
The example shows a recorder connected to
the DIGITAL COAX 2 (DVR/VCR) input.
Note
1 If your video component doesn't have a digital audio output, omit this step. If it only has an optical digital output, you can con-
nect it to the optical input on this receiver using an optical cable. When you set up the receiver you'll need to tell the receiver
which input you connected the component to (see The Input Assign menu on page 36).
14
En
®
, and the Windows logo are
1
This receiver
FM UNBAL
75
IN CD
DVR /
IN
VCR
OPT
1
OUT
(CD)
IN
ASSIGNABLE
TV /
DIGITAL IN
SAT
IN
IN
DVD
/LD
ASSIGNABLE FRONT
IN
DIGITAL IN
D V D
COAX
5.1CH
INPUT
2
PLAY
IN
(DVR/VCR)
CD-R
IN
/ TAPE
COAX
/ MD
1
(DVD/LD)
REC
OUT
L
AUDIO
3
2
R IN L
OPTICAL COAXIAL
REC
AUDIO IN VIDEO IN
DIGITAL OUT
DVR, VCR, LD player, etc.
AM
Ω
LOOP ANTENNA
VIDEO
OUT
MONITOR
OUT
SUB
WOOFER
PREOUT
1
R L
OUT
PLAY
AUDIO OUT VIDEO OUT