Page 1
AVP Synthesizers Monophonic Bass Synthesizer MBS-100 User Manual...
Page 2
MBS-100 - is a monophonic bass synthesizer inspired by synthesizers produced in the soviet era times while having the flexibility, MIDI control and compact package of the 21 century. It has 19 knobs, 3 switches and 4 buttons with which you can control the parameters of the sound and MIDI.
Page 3
Controls Front panel Rear panel ① OSC Oscillator control section. OSC1 LEVEL, OSC2 LEVEL - volume parameter control of each oscillator; OSC1 TUNE, OSC2 TUNE - pitch tuning of each oscillator control; SYNC button - synchronization on/off between oscillators; OSC1, OSC2 button - waveform selection for each oscillator - saw, square, pulse 1 and pulse 2;...
Page 4
⑨ MIDI – MIDI INPUT and MIDI THRU connection ports. MBS-100 adapter operates on 220v, if used on 110v - a power converter from 220v to 110v is required. If you are using it in 110v area, only use the unit with a 220-110v power converter.
Page 5
OSC, VCF, VCA, LFO and ADSR. OSC Section The TUNE controls allow you to adjust the pitch of MBS-100 to other instruments, as well as for the classical detuning of the oscillators. Adjustment can be made in the range of ±2...
Page 6
On position. MIDI channel selection In order to set one of 16 MIDI channels on MBS-100 use the button MIDI located in the OSC section. In order to set the channel hold down the MIDI button while turning the POWER on.
Page 7
MODULATION (CC#1) – allows for VCF control. Warranty The standard warranty on MBS-100 synthesizer is for one year from the date of purchase. 1. The warranty does not apply in the following cases: - Expiration of the guarantee (after one year from the date of purchase); After- guarantee servicing is possible with additional charges;...
Need help?
Do you have a question about the MBS-100 and is the answer not in the manual?
Questions and answers