Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Manual
REGULATORY NOTICES
CB :
● Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the
computer.
● Do not remove any batteries from the computer while it is powered on.
● Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted)
in any way. Even if the computer continues to work with a damaged battery in place, it may cause circuit
damage, which may possibly result in fire.
● Recharge the batteries using the Slat PC's system. Incorrect recharging may make the battery explode.
● Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service
representative or qualified service personnel.
● Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries
carefully. Batteries may explode or leak if exposed to fire, or improperly handled or discarded.
● Keep the battery away from metal appliances.
● Affix tape to the battery contacts before disposing of the battery.
● Do not touch the battery contacts with your hands or metal objects.
RF Exposure :
This equipment must be installed and operated in accordance with provided instructions and must not be
co-located or operating in conjunction with any other antenna or transmitter. End-users and installers
must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF
exposure compliance. SAR value: 0.645 W/kg.
CE Notice (European Union) :
This symbol
indicates this Slat PC complies with the EMC Directive 2004/108/EC and the European Union's
Low Voltage Directive 2006/95/EC. This symbol also indicates that this Slat PC meets the following technical stan-
dards:
● EN 55022 — "Limitations and Methods of Measurement for the Radio Interferences of Information
Technology Equipment."
● EN 55024 — "Information technology equipment - Immunity characteristics - Limits and methods of
measurement."
● EN 61000-3-2 — "Electromagnetic compatibility (EMC) - Chapter 3: Limits - Section 2: Limits on the
harmonic current emissions (Equipment input current up to and including 16 A per phase)."
● EN 61000-3-3 — "Electromagnetic compatibility (EMC) - Chapter 3: Limits - Section 3: Limits on the
voltage fluctuations and flicker in low-voltage power supply systems for equipment with rate current up to
and including 16 A."
NOTE: EN 55022 emissions requirements provide for two classifications.
(1) Class A governs commercial use
(2) Class B governs residential use
Declaration of Conformity for EU countries
Hereby, GIGABYTE, declares that this Slat PC series is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
Advertisement
Table of Contents
Related Manuals for Gigabyte S1185
Summary of Contents for Gigabyte S1185
- Page 1 ● EN 61000-3-2 — “Electromagnetic compatibility (EMC) - Chapter 3: Limits - Section 2: Limits on the harmonic current emissions (Equipment input current up to and including 16 A per phase).” ● EN 61000-3-3 — “Electromagnetic compatibility (EMC) - Chapter 3: Limits - Section 3: Limits on the voltage fluctuations and flicker in low-voltage power supply systems for equipment with rate current up to and including 16 A.” NOTE: EN 55022 emissions requirements provide for two classifications. (1) Class A governs commercial use (2) Class B governs residential use Declaration of Conformity for EU countries Hereby, GIGABYTE, declares that this Slat PC series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
-
Page 2: Bsmi Notice (Taiwan Only)
BSMI Notice (Taiwan Only) ● The symbol above must be attached to the product indicating compliance with the BSMI standard. ● Most Slat PC are classified by the Bureau of Standards, Meteorology and Inspection (BSMI) as Class B information technology equipment (ITE). ● Caution: Suggest to operate under 40˚C CCC (China only) ● On Class A systems, the following warning will appear near the regulation label: ● Warning: This is a Class A product. In a domestic environment, this product may cause radio interference, in which case users may be required to take adequate measures. Federal Communications Commission Notice : This equipment has been tested and found to comply with the limits for a Class B digital service, pursuantto Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. Any changes or modifications made to this equipment mayvoid the user’s authority to operate this equipment. This equipment generates, uses, and can radiateradio... - Page 3 The FCC RF safety requirement: The radiated output power of the wireless LAN Mini PCI Card and Bluetooth card is far below the FCC radio frequency exposure limits. Nevertheless, the Slate PC series shall be used in such a manner that the potential for human contact during normal operation is minimized as follows: (1) Users are requested to follow the RF safety instructions on wireless option devices that are included in the user’s manual of each RF option device. CAUTION:To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm (8 inches) must be maintained between the antenna for the integrated wireless LAN Mini PCI Card built in to the screen section and all persons.
-
Page 4: Battery Maintenance
Battery Maintenance Guidance Before you use your Slat PC on the road, you will have to charge the battery pack. The battery pack begins to charge as soon as the Slat PC is connected to external power using the power adapter. Fully charge the battery pack before using it for the first time. A new battery pack must completely charge before the Slat PC is disconnected from external power. It takes a few hours to fully charge the battery when the Slat PC is turned OFF. Please note the battery stops charging if the temperature is too high or the battery voltage is too high. NOTE: Do not leave the battery pack discharged. The battery pack will discharge over time. If not using a battery pack, it must continued to be charged every three month to extend recovery capacity or else it may fail to charge in the future. Lithium-Ion rechargeable batteries require routine maintenance and care in their use and handling. Read through below instruction and your Slat PC will achieve the maximum battery life span. Battery Maintenance : ● Do not leave batteries unused for extended periods of time, either in the Slat PC or in storage. When a battery has been unused for 3months, check the charge status and charge or dispose of the battery as appropriate. -
Page 5: Low Battery State
Low Battery State : When the battery level is low, a notification message appears. If you do not respond to the low battery message, the battery continues to discharge until it is too low to operate. When this happens, your Slat PC goes into Suspend mode. There is no guarantee your data will be saved once the Slat PC reaches this point. CAUTION: To protect your Slat PC from damage, use only the power adapter that came with it because each power adapter has its own power output rating. Once your Slat PC goes into suspend mode as a result of a dead battery, you will be unable to resume operation until you provide a source of power either from an adapter or a charged battery. Once you have provided power, you can press the Suspend/ Resume button to resume operation. In Suspend mode, your data is maintained for some time, but if a power source is not provided promptly, the power indicator stops... - Page 6 This manual will help you to get started with setting up your Slate PC. The final product configuration depends on the model at the point of your purchase. GIGABYTE reserves the right to amend without prior notice. For more detailed information, please visit our website at http://www.gigabyte.com...
-
Page 7: Panoramic View
GIGABYTE Tablet PC Tour Panoramic View Directing Hot Key Left Button of Mouse Microphone Right Button of Mouse Light sensor Windows Button Webcam To control mouse direction; press the directing hot key to simulate as left key of Webcam Indicator mouse. -
Page 8: Left View
● Press and release the Power button to D-sub (VGA) Port turn on the operation system. Press "+" to enter into GIGABYTE BIOS Setup Micro SD Card Reader Utility. USB Keyboard is recomended to USB Port use for setting up BIOS functions under GIGABYTE BIOS Setup Utility. -
Page 9: Base View
Base View Keyboard docking connection port Back View Enjoy movies and entertainment without Rear Camera any hassle by simply unfold the stand Kickstand ... - Page 10 ■ ● Press and release the Power Button to turn on the operation system. Press "+" to enter into GIGABYTE BIOS Setup Utility. It is recommended to use USB keyboard for setting up BIOS functions under BIOS setup Utility. ● Press and release the Power Button to turn on the operation system. Press "-"...
- Page 11 Appendix Warranty & Service : ■ Warranty and service and related information please refer to the warranty card or GIGABYTE service website as the below link: http://www.gigabyte.com/support-downloads/technical-support.aspx FAQ : ■ FAQ (Frequent Asked Questions) please refer to the below link:...