Ptt Id Transmit Mode; The Side Key Can Be Programmed The Functions - Yanton T-518 User Manual

4. When cloning completed, slave unit restart automatically.
5. Switch to next slave unit and power on, press side key 2 of
master unit to clone.
6. Power off master unit to exit.
◆ During data transmission, if no data received 3 seconds Master
unit flash Red (0.5s ON, 0.5S OFF)

PTT ID TRANSMIT MODE

1. Press PTT to send.
3. Both.
◆ OFF: Press PTT or release it will not send ANI code.
◆ PRE-ONLY: Press PTT to send the ANI.
◆ POST-ONLY: Release PTT to send the ANI.
◆ BOTH: Both press and release PTT to send ANI.
THE SIDE KEY CAN BE PROGRAMMED
THE FUNCTIONS AS FOLLOW,
1. NONE 2. MONITOR
3. SCAN ON/OFF 4. HIGH/LOW POWER
5. TALK AROUND 6. REVERSE
7. PRIORITY SCAN 8. VOX ON/OFF
1)NONE
◆ No function to be set
2. Release PTT to send.
4. OFF (DTMF Encode only)
11