Advertisement
Indicator Lamp
~~~~~--...
'
.,
miD dBb :
0
~~------
The indicator lamp shows the following statuses for the
adapter.
On
Power zoom can be used.
*1
Off
Power zoom cannot be used.
*2
Slow flashing
Heat warning (will stop soon)
*3
Fast flashing
Heat warning (stopped)
*3
*
1 : If the lens has the zoom ring lock engaged, power
zoom will not be possible even if the lamp is on.
*2: In the following situations, the indicator lamp will be
off and you will not be able to use the power zoom.
• When the zoom mode is set to Manual Zoom [MZ].
• When the camera's power is off, it has
automatically powered off, or the battery is dead.
• When the jam detector is pressed.
*3: Using the adapter for extended periods of time or
in hot locations can cause the internals to heat
up, making it stop working. If the indicator lamp is
flashing, stop using the adapter until it is cooler.
ENG-10
Materials
• Usable Focus Range for the Power Zoom
Lens name
Usable focus range for the
power zoom
EF-S 18-135mm f/3.5-5.6 IS USM
19-132mm
• The zoom may stop outside the displayed range depending on
use conditions.
• Zoom speed
Speed level setting and wide
Lens name
~
telephoto times
SLOW
FAST
EF-S18-135mm f/3.5-5.6 IS USM
Approx.
11 . 5 to Approx. 4.0 to
15.0 sec.
14.5 sec.
• The displayed range may change depending on use conditions.
• Minutes of Continuous Operation
Minutes the adapter can be
Lens name
used continuously using AAA
alkaline batteries
EF-S18-135mm f/3.5-5.6 IS USM
Approx.
100 min.
• Data based on Canon testing
standards.
• The continuous operating time may vary depending on the
battery brand or operating
conditions.
Advertisement
