Related Manuals for Digital View DV-3000 SERIES
Summary of Contents for Digital View DV-3000 SERIES
- Page 1 SERIES DV-3000 SERIES DV-3000 Colour LCD Rugged Monitor Operating Instructions Operating Instructions...
-
Page 2: Copyright Notice
This document contains proprietary information which is protected by copyright. All rights reserved. TRADEMARKS • Digital View is a trademark of Digital View Ltd • DV-3000 is a trademark of Digital View Ltd Trademarks are the property of their respective owners. -
Page 3: Table Of Contents
INTRODUCTION The Series 3000 is a range of rugged colour LCD computer monitors utilising TFT type active matrix LCD's and optional touch screen. They operate with standard PC's that have a normal graphics card installed. The display is crisp, clear and has a high speed response time suitable for showing video, animation and multimedia applications. -
Page 4: System & Installation
SYSTEM & INSTALLATION System Includes • LCD monitor • Cable for VGA connection • Cable for Touch screen connection ( option if touch screen is fitted ) • Power supply: 100 – 240V AC input, 12V DC output Please check that each of the above are included. When unpacking and during use care must be taken not to press the surface of the display, the LCD is fragile. -
Page 5: On Screen Display Setting
On Screen Display Setting First time setup: The following reviews the functions which are accessed through the On Screen Menu, it may not be necessary to adjust any of them. The settings will be retained and most likely only need adjusting if the monitor is installed on a different computer or if a different VGA card is installed in the computer. -
Page 6: Switches & Functions
SWITCHES & FUNCTIONS All controls are mounted on the back of the monitor housing. Monitor Back MENU SELECT Brightness ON/OFF VGA input AUX input Power input Controls on the back: • Menu - Brings up the On Screen Display menu (OSD) •... -
Page 7: Connection Of Touch Screen & Installation Of Setup Program
TOUCH SCREEN SETUP & INSTALLATION SETUP PROGRAME If you have a DV-3000 model with touch screen fitted you will need to connect the touch screen to a COM port on the computer and install driver software. Connection of Touch screen •... -
Page 8: Notes & Precautions
NOTES & PRECAUTIONS Notes • Resolution: When connecting the monitor it is important to ensure that the computer is set to a resolution equal to or less than the maximum for the monitor otherwise a satisfactory image cannot be displayed. Vertical Refresh Rate: Ensure that the vertical refresh rate for the graphics •... -
Page 9: Specifications
SPECIFICATIONS Input auto-synchronization RGB Analog (0.7Vp-p) Standard VGA input 15-pin mini D-sub ( Female ) • Display resolution DV-3010: 640 x 480 • DV-3030: 800 x 600 • DV-3130: 800 x 600 • DV-3150: 1024 x 768 • DV-3350: 1024 x 768 •... -
Page 10: Troubleshooting
TROUBLESHOOTING In the event of an apparent problem consideration should be given to following: • Computer system - check this is operating correctly. • Power supply - ensure there is power. • Monitor - see notes below for checking the LCD monitor. •... -
Page 11: Regulatory Notices
WARRANTY The products are warranted against defects in workmanship and material for a period of one (1) year from the date of purchase provided no modifications are made to it and it is operated under normal conditions and in compliance with the instruction manual. - Page 12 DV-3000 Instructions For Use Version 1, Rev 1.2 Date: 17 February 1998...