Advertisement
3.2. By pressing Clock Button and V -
Button again to cancel the summer time setting.
Noted:
LCD must be in real time display to start week and time setting. If LCD is in program setting
display, press CLOCK Button once to return to real time display.
E'. Program Setting
t.
When the LCD is in real time display, press 1\+ Button once to change to program
setting display, "tON" will be shown on the lower left corner of the LCD:
1.1 "1" indicates the program group's number (program group is from 1 to 14)
,
1.2 "ON" indicates power on time.
1.3 "OFF" indicates power off time
2. Tovchose the program group and on/off status, press
1\+
Button to increase the group
number, sequence as follows:
lON-710FF-7
200N-7200FF-7
d OIj'J/OFF(for countdown)-7 real time display -7
1
3. To reduce the program group number, press -Button, LCD displays in the following
sequence:
rd
ON/OFF (for countdown)-7200FF-7200~-7
...... 10FF-710N-7
real time disPlary
4. After choosing the program group, then can set the week and time. Press SET Button
until the week display flashes, press I\T Bulton each time, the LCD will display the
following in sequence:
4.1 MO TU WE TH FR SA SU
4.2MO ~TU-7WE-7TH-7FR-7SA-7SU
4.3MOWE FR
4.4TU TH SA
4.5SASU
4.6MOTUWE
4.7TH FR SA
4.8 MO TU WE TH FR and
4.9 MO TU WE TH FR SA
5. By pressing the V-Button,
the week display will be shown in the opposite direction as
above sequence.
6. Press I\+/V-Button
once will increase or reduce the week display slowly. To press and
hold the button, the display moves quickly. Release the button until your desired week
pattern shown on the display. Press SET B~tton to confirm, week display stops flashing.
7. After set the day of the week, the hour display flashes, repeat procedures mentioned in
Part 02. Time Setting to set time.
8. To set other program group's on/off time, repeat procedures mentioned from #2 to #7.
Noted:
(a). To change a preset program, repeat procedures #2 to #7
as
mentioned in Part E and
3/6
Advertisement
