JVC KD-R701E Service Manual page 19

4.6 Service mode
Operating key: [MENU]
Navigation key : Press [SEL] in any main display item to select that option.
Volume Knob Turn: forward and backward selection
INIT ALL
SIRIUS RST
XM RST
HD RST
DAB RST
BT RST
RUNNING
Note : A disc is inserted, and it is displayed only at the time of CD function.
CHECK MODE
CD ERROR
CLR CDERROR
CH ERROR
CLR CHERROR
TSUBUYAKI
[DOWN] (3 sec)
Initialize all data to factory shipment state.
SIRIUS Soft Reset
(It clears all the contents of built-in RAM and EEPROM, and performs software reset.)
* Active at the time of SIRIUS connection.
XM Soft Reset (It clears all contents of built-in RAM and EEPROM, and performs software reset.)
* Active at the time of XM connection.
HD Soft Reset (It clears all contents of built-in RAM and EEPROM, and performs software reset.)
* Active at the time of HD connection.
DAB Soft Reset (It clears all contents of built-in RAM and EEPROM, and performs software reset.)
* Active at the time of DAB connection.
BT Soft Reset (It clears all contents of built-in RAM and EEPROM, and performs software reset.)
* Active at the time of BT connection.
MODE 1 CD4 module running mode 1 (Only factory use)
MODE 2 CD4 module running mode 2 (Only factory use)
NORMAL PLAY Disc operation & playback. (playback from starting position)
CURENT ##** Laser Electric Current Value
##: Initial value **: Current value
JITTER #### Jitter Value
Note: Pressing "FF" or "REW" key to switch between current value
and jitter value display.
OUT TRK OFF Tracking off at CD outermost lap.
INN TRK OFF Tracking off at CD innermost lap.
CD LASER ON CD Laser Illumination and electric current.
CURENT ##** Laser Electric Current Value
##: Initial value **: Current value
JITTER #### Jitter Value
Note: Pressing "FF" or "REW" key to switch between current value
aand jitter value display.
STOP Disc stop, LD(Laser) OFF
Display the CD Error past record stored in EEPROM.
TOTAL-****: Total error count
E#xxyyyy : Latest 3 errors recorded. #: counter xx: error code yyyy: detailed error code
0#xxyyyy : The first 5 errors recorded. #: counter xx: error code yyyy: detailed error code
Note: Shifting among the above items is done by using "FF" or "REW" key.
Clear CD Error history from EEPROM.
Display the CH Error past record stored in EEPROM
* Active at the time of CD CHANGER/ iPod (J-BUS) connection
E#xxyyyy : Latest 3 errors recorded. #: counter xx: error code yyyy: detailed error code
0#xxyyyy : The first 5 errors recorded. #: counter xx: error code yyyy: detailed error code
Note: Shifting among the above items is done by using "FF" or "REW" key.
Clear CH Error history from EEPROM.
* Active at the time of CD CHANGER/ iPod (J-BUS) connection
Only engineer use
(No.MA445<Rev.001>)1-19