Your Ear Beans are designed for listening to music wirelessly with high quality sound delivered through the latest in Bluetooth® wireless technology. With built-in MP3, AAC and apt-X low latency codec for high quality audio streaming. Ear Beans can be easily connected to a mobile phone for call conversation and music listening, they are also capable of connecting to the other Bluetooth®-enabled devices including...
Please inspect this package and refer to the package contents list below to verify all items were included: POW-AU001 Bluetooth® Ear Beans (1) USB Charging Cable(1) User's Manual(1) 4. POW-AU001 Bluetooth® Ear Beans Overview ① Answer ② Indicator LED ③ Charging Port ④ Next Track / Volume + ⑤...
Disconnect the POW-AU001 from the power supply as soon as the battery is fully charged, overcharging will reduce the service life of the battery. A charged battery will lose its capacity if it is not used on a regular basis.
Page 5
When the battery power is low, the headset will remind you by voice prompt "Battery low" every 20 seconds, and the red indicator light starts to flash. - For using the POW-AU001 with iPhone, an additional battery meter feature will be activated and the remaining battery capacity will display on your phone.
7. Pair to your Bluetooth® phone Before you use your Ear Beans the first time, you must pair them with a Bluetooth® enabled mobile phone. Pairing is a one-time process and is required only for the first connection. Please note that your Ear Beans can be connected with two mobile devices simultaneously.
8. Turning headset on and off Turn on your headset Slide the power switch to On to activate your Ear Beans. If your Ear Beans have completed the pairing process successfully, when the Ear Beans are turned on, they will automatically connect to the device you last connected to. Please ensure your Device's Bluetooth®...
Page 8
Push toggle switch to increase or decrease volume. Note: Your Ear Beans support the A2DP profile that allows stereo music streaming from a Bluetooth phone. The music will pause automatically when you begin either making or receiving a call, and resume when the call conversation has ended.
10. Using for phone calls Last number re-dialing At standby status, double press the ANSWER to re-dial the last number you dialed. Note: the last number re-dialing is available only for the first device if two Mobile phones are connected. The connection sequence can be determined by reconnecting manually.
Note: The same operation could be performed in case of Multi-connection. Volume adjusting Push toggle switch to increase or decrease volume. Mute While a call is in progress, push the toggle switch for 2 seconds to mute the headset. A reminder tone will sound every 10 seconds until you return to the call. Repeat the operation to un-mute.
Unplug this device when unused for long periods of time and during lightning storms. The battery used in this device may present a risk of fire or chemical burn if mistreated. 12. FCC & IC Statement Operation is subject to the following two conditions: This device may not cause harmful interference.
13. EC Declaration of Conformity Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modifications to this equipment.
14. Warranty The condition of this warranty and supplier's responsibilities under this warranty are as follows: Warranty is non-transferable and is limited to the original purchaser only. - You must be able to prove the date of original purchase of the unit with a dated receipt.