Related Manuals for FCCID BTS-51
Summary of Contents for FCCID BTS-51
- Page 1 BTS-51 BM3251_20140808 V1.0 User’s Manual Model: BTS-51 Bluetooth Speaker (Splash-proof)
- Page 2 BTS-17 BM3251_20140808 V1.0 A. Important Don’ts • Do not place naked flames, such as lighted candles on or near the product. • Do not place objects filled with liquids, such as vases on or near the product. • Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration.
- Page 3 BTS-17 BM3251_20140808 V1.0 B. Outlook and Controls Item Control Button (ON / OFF) Charge LED Indicator Bluetooth LED Indicator (Blue) Button Button Button Button MIC Hole Micro USB socket (Under Rubber Seal Cover) Vacuum Cupule Speaker C. About the rechargeable Battery & Charging 1.
- Page 4 Mobile Phone or Personal Computer), the device will enter to Bluetooth searching mode automatically, if not, tap the relate selection to manually enter to searching mode. (refer to your device’s manual when necessary) BTS-51 3. Your mobile device should show “BTS-17” in list, and then select it for pairing.
- Page 5 BTS-17 BM3251_20140808 V1.0 and still in record. The Bluetooth Speaker will re-connect this mobile device as priority if it is in Bluetooth searching device mode. 2. If not found in some seconds, the Bluetooth Speaker then is turn into new pairing mode internally. 3.
- Page 6 BTS-17 BM3251_20140808 V1.0 you still want to use the device. 2. If not, the Bluetooth Speaker will power Off automatically when the battery is keeping low energy level in some minutes. 3. In this case, the device cannot be turned On, until you recharging the battery at least 10 ~ 15 minutes, because the rechargeable battery has not enough energy.
- Page 7 BTS-17 BM3251_20140808 V1.0 audio source. No response from speaker • Restart the speaker by power Off and On. N. Specification Dimension 75 mm (L) x 75 mm (W) x 46.5 mm (H) (Not included Vacuum Cupule) Weight 86.5g (Not included Vacuum Cupule) 102.5g (with Vacuum Cupule) Specification V2.1 + EDR...
- Page 8 FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐Reorient or relocate the receiving antenna. ‐‐Increase the separation between the equipment and receiver. ‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐Consult the dealer or an experienced radio/TV technician for help. ...
Need help?
Do you have a question about the BTS-51 and is the answer not in the manual?
Questions and answers