Oki PS-800 User Manual
Oki PS-800 User Manual

Oki PS-800 User Manual

System
Hide thumbs Also See for PS-800:

Advertisement

PS-800
Soldering System
PS-800 System User Guide
PS-800 System Benutzerhandbuch
Manuel d'utilisation du système PS-800
Manuale d'uso del sistema PS-800
Guía del usuario del sistema PS-800

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PS-800 and is the answer not in the manual?

Questions and answers

Summary of Contents for Oki PS-800

  • Page 1 PS-800 Soldering System PS-800 System User Guide PS-800 System Benutzerhandbuch Manuel d’utilisation du système PS-800 Manuale d'uso del sistema PS-800 Guía del usuario del sistema PS-800...
  • Page 2: Table Of Contents

    PS-800 Soldering System Operations Manual & User Guide Congratulations on your purchase of the PS-800 Soldering Station. It utilizes SmartHeat ® technology to insure unsurpassed performance without concern for system calibration or board damage. It has been designed and manufactured to the highest quality standards and will continue to provide consistent performance and reliability.
  • Page 3: Initial Setup

    3. SMARTHEAT: NO CALIBRATION REQUIRED The PS-800 System is comprised of an induction coil assembly and a heater tip. Each heater tip is equipped with a self-regulating heater, which senses its own temperature and tightly maintains its pre-set idle temperature for the life of the heater-tip –...
  • Page 4: Selecting Heater Tips

    4. SELECTING HEATER TIPS OK International Heater Tips come in a wide variety of tip geometries and temperature ranges (contact your local OK International Representative for more information). These tip geometries cover a broad range of tasks from delicate precision work to heavy ground plane soldering. Correct Too Light Too Heavy...
  • Page 5: Troubleshooting

    6. REPLACING COIL ASSEMBLIES Push the Power Switch “Off.” Wait for the heater tip to reach room temperature. To disconnect the Coil assembly from the Soldering Handle assembly press the button on the Coil assembly and pull it away from the Soldering Handle assembly. Release button PS-CA1/PS-CA2 Remove the heater tip from the handle assembly.
  • Page 6: Specifications

    OK International representative for pricing and availability. OK International warrants the PS-800 power supply and Handle cord assembly against any defects in materials or workmanship for one (1) year from the date of purchase by the original owner.

Table of Contents