Related Manuals for Dixix HC8000
Summary of Contents for Dixix HC8000
- Page 2 Thank you for your purchase. In order to make you more comfortable by using the product, please read this user manual carefully and keep it for future reference. www.dixix.com...
- Page 3 Blade cover Clipper Blade blade head Comb adjusting Main body taper adaptor On/Off slide switch Power cord Comb stand (optional) 13mm 16mm 19mm 22mm 25mm comb comb comb comb comb comb comb comb...
- Page 4 This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Page 5 must only be supplied at safety extra low voltage corresponding to the marking on the appliance. Note: n This product is not waterproof, except the blades. n Do not immerse the product into water. n Do not use the product during bathing or showering.
- Page 6 skin is dry condition during use. n The clipper blade is extremely sharp, to prevent injuries, ensure that the blade does not touch the skin at all times during use. n If the product or any other part is damaged, do not re-use it. Otherwise, it may cause harm to human body.
- Page 7 n During product cleaning, ensure to turn off the power and remove the A/C adaptor from wall socket. Do not wrap the cord around the appliance. n Do not use the product at wound or inflammatory area, and allergic skin. n Do not make any alteration to the product, or give it to unofficial professional people to do...
- Page 8 Usage 1. Changing the blade head • The blades can be removed and detached from the clipper by pressing at the rear of the blade head forwards. • To reattach the blades, slide the blade head back onto the clipper until it has reengaged with the clipper. Note: •...
- Page 9 3. Fitting the push-on combs • Eight colour push-on comb attachments allow for cutting length adjustment, each colour represents a different length of comb size from 3,6,9,13,16,19,22 and 25 mm respectively. • Make sure the clipper is turned off before attaching or removing the combs (slide down the switch to "...
- Page 10 4. Operation of clipper • Plug A/C adaptor into the wall socket and remove the plastic blade cover. • Slide up the switch to " " in turning on the power of the clipper for hair cutting. • After finishing the hair cutting, slide down the switch to "...
- Page 11 Note: • Do not use the clipper for longer than 20 minutes continuously as the blades may get hot. • If the blades get hot, please stop to use it. Allow the blades to get cool before next use, in order to keep comfortable cutting practice.
- Page 12 Clean and Maintenance • It is essential to switch off the product, and remove the adaptor from the wall socket before cleaning and maintenance. • To avoid the risk of electric shock, the product and the adaptor must not be allowed to contact with liquid. •...
- Page 13 4. The detached blades can be washed under the tap or water. 5. If finding hair residues on the blade, it is recommended to change the taper up and down to remove it across the blades. 6. Remove excess water after cleaning. Keep the blade to be opened and let it dry completely.
- Page 14 • Do not place the product at sunlight or high temperature directly. Important: n Blades must be cleaned and oiled on a regular basis for proper functioning. Failure to regularly clean and oil the blades will void the warranty. Environmental protection •...
- Page 15 Guarantee period is 2 years from first retail purchase. To get maintenance or repairing service, please bring the product with purchased invoice, and contact local or closer distributor or service station. Professional Corded Hair Clipper Model: HC8000 www.dixix.com Manufacturer: DIXIX INTERNATIONAL LTD.
- Page 16 HC8000 PROFESSIONAL CORDED HAIR CLIPPER C44-8000170220ARO004...
Need help?
Do you have a question about the HC8000 and is the answer not in the manual?
Questions and answers