Once assigned, device will be ready for use. » To assign the device, use the VPro5 Usage Summary Software provided on the USB flash drive received with device (please review pages 5-7 for detailed instructions).
Page 6
Your Guide to Light Notifications • Blue 5 minute cycle is in progress • Green 5 minute cycle is complete (3 blinks) • Device is fully charged • Switch is pressed by user before treatment is complete • When the 5 minute treatment is interrupted and not resumed within the 30 minute window •...
Page 7
Usage Summary Software Assigning a Patient: Step by Step » Please connect the device to your computer via the blue wire USB cable provided with your device. » Please insert USB into computer. When prompted, select the Apple or PC folder that corresponds to your computer.
Page 8
Usage Summary Software Assigning a Patient: Step by Step » Enter new patient details and customized patient ID of your choice and select “Add patient.”...
Page 9
Usage Summary Software Assigning a Patient: Step by Step » At this point, please select “Assign” to the right of the newly entered patient details. Device is now ready to record patient use. You will be able to obtain usage summary when you next plug in the vibration device at »...
Page 10
Usage Summary Software Accessing Usage Data » To view patient usage data, please open the software which should be saved to your desktop. Please connect the device to the computer and select “Usage Summary From Device” to view » data for patient currently using device. »...
Page 11
Usage Summary Software Usage Results Example » Graphical representation of patient’s VPro5 compliance will appear in the center of the software interface. A usage log will populate on the right side of your software interface. »...
Need help?
Do you have a question about the VPro5 and is the answer not in the manual?
Questions and answers