Summary of Contents for Crua Hybrid
- Page 1 Crua Hybrid Instruction Manual The Tent/Hammock, sleeping bag and mattress will come in 3 separate bags. Tent/Hammock: In the bag are: • Tent/Hammock • Flysheet • Stakes • Poles • Ties Crua Hybrid Set-Up Instructions...
- Page 2 Connect Spreader Bars and click the button through STEP 2 • Insert 3 poles into pole sleeves (note 2 x longer poles at head end, shorter pole at foot end) STEP 3 • Place poles in eyelets and clip poles at side. Crua Hybrid Set-Up Instructions...
- Page 3 STEP 4 (For tent use) • Place tent on ground/area to pitch. Use stakes to tie back both guy-lines at head end. Straighten out Hybrid and repeat at foot end STEP 5 • If using without flysheet, the tent is pitched •...
- Page 4 Velcro on the pole sleeves as shown STEP 7 • Buckle in the sides (head and foot of tent). Use the orange elastic bands attached to flysheet to stake down (as seen below). Velcro down the sides and open the vents. Crua Hybrid Set-Up Instructions...
- Page 5 STEP 10 • If using the flysheet, match the Velcro patches on the 4 corners of the pole sleeve to the underside of the flysheet • Use Velcro patches at either side to secure flysheet. Crua Hybrid Set-Up Instructions...
- Page 6 Just release the valve and roll up to deflate Sleeping Bag A ‘Mummy-style’ sleeping bag is included. This sleeping bag is exactly customized to the size of the Hybrid for use in perfect harmony with the Hybrid system. Crua Hybrid Set-Up Instructions...
- Page 7 Users have the option of reducing weight by temporarily removing the hanging system from the Hybrid. Simply the knots at the end of the ropes. This will reduce weight by more than half if the use is weight sensitive and the user wants to use as a tent only. The hanging system can be re-attached afterwards.
Need help?
Do you have a question about the Hybrid and is the answer not in the manual?
Questions and answers
Fibreglass poles won't go into the sleeves