Advertisement
Available languages
Available languages
Advertisement
Table of Contents
Related Manuals for Assault BASS10.1
Summary of Contents for Assault BASS10.1
- Page 1 BASS10.1 10" Inch 26cm 4Ohm Subwoofer & Bass Tube 550w RMS Instruction manual...
- Page 2 Thank you for choosing Bassface. From the simplest connector to our top of the range amplifier - every element of these products has been designed to give you the best possible performance for your money. Please take the time to read these instructions carefully as they contain useful and important information.
- Page 3 The BASS8.1, BASS10.1 and BASS12.1 are high performance single voice coil subwoofers intended for use in a car audio environment. The woofers have a nominal impedance of 4 ohms and are supplied fitted in pre built enclosure with a standard Positive/Negative Speaker cable connection.
- Page 4 Aim to ensure both the sub cone and rear port are unobstructed – horizontal mounting in the boot against the rear seats often offers the easiest and safest solutions. The unit will need strapping in securely as is light and rounded, it can and will move around quite a lot in your boot if not.
- Page 5 ITALIAN Il BASS8.1/BASS10.1/BASS12.1 è un alto rendimento singolo subwoofer bobina destinato all'uso in un ambiente car audio. Il woofer ha un'impedenza nominale di 4 ohm e viene fornito montato in pre recinto costruito con uno standard positivo / negativo di collegamento Cavo altoparlante.
- Page 6 L'unità avrà bisogno di reggiatura in modo sicuro come è leggero e arrotondato, si può e si muoverà intorno a un bel po 'nel bagagliaio, se non. Provare a utilizzare un forte legame per tenere l'unità in posizione - Velcro non è in genere adatto in quanto si può strappare in frenata.
Need help?
Do you have a question about the BASS10.1 and is the answer not in the manual?
Questions and answers