Table of Contents
Advertisement
61
Select a data rate from the drop-down list. The data rate affects throughput. If you select a low
Data Rate
data rate value, for example, the throughput is reduced but the transmission distance increases.
Specify the threshold package size for RTC/CTS. A small number causes RTS/CTS packets to be
RTS/CTS Threshold
sent more often and consumes more bandwidth.
Specify the distance between Access Points and clients. Longer distances may drop high-speed
Distance
connections.
Merges data packets into one packet. This option reduces the number of packets, but increases
Aggregation
packet sizes.
Check this option to enable wireless traffic shaping. Traffic shaping regulates the flow of packets
Wireless Traffic
leaving an interface to deliver improved Quality of Service.
Shaping
Specify the wireless transmission speed used for downloading.
Incoming Traffic Limit
Specify the wireless transmission speed used for uploading.
Outgoing Traffic Limit
Click [Accept] to confirm the changes or [Cancel] to cancel and return previous settings.
Accept / Cancel
Advertisement
Table of Contents
