Table of Contents
Advertisement
Quick Links
Keep the manual handy – so you can use it whenever necessary.
PNEUMATIC DEBURRING TOOL
Please read this manual carefully before you attempt to use
your tool so that you may use it properly and safely.
BURR CUTTER
PROFESSIONAL TOOL
Model
Maximum Operating Pressure
Air Consumption (No Load)
Maximum Power
Rated Speed (Maximum Free Speed)
Mass (Weight)
Sound Pressure Level
Sound Power Level
Vibration Level [Uncertainty K]
(according to ISO20643)
Thread Size of Air Inlet
Due to continuous product development/improvement the specifications and
configurations in this document are subject to change without prior notice.
Model BC-005
Specifications
MPa
3
m
/min
W
-1
min
Kg
dB(A)
dB(A)
2
2
m/s
[m/s
]
Manufactured by :
NITTO KOHKI Co., Ltd.
2-9-4, Nakaikegami, Ohta-ku,
Tokyo, 146-8555, Japan
TEL
: (81)-3-3755-1111
FAX
: (81)-3-3753-8791
E-mail : overseas@nitto-kohki.co.jp
URL : www.nitto-kohki.co.jp
BC-005
0.6
0.22
72
420
0.75
88.8
99.8
4.2 [0.91]
Rc1/8
Orijinal Instructions
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Nitto Kohki BC-005
- Page 1 Thread Size of Air Inlet Rc1/8 Due to continuous product development/improvement the specifications and configurations in this document are subject to change without prior notice. Manufactured by : NITTO KOHKI Co., Ltd. 2-9-4, Nakaikegami, Ohta-ku, Tokyo, 146-8555, Japan : (81)-3-3755-1111 : (81)-3-3753-8791 E-mail : overseas@nitto-kohki.co.jp...
-
Page 2: Table Of Contents
7. ORDERING SERVICE PARTS ………………………… 7 nach eine Betriebsanleitung in 8. THREAD SIZE OF HOSE FITTING …………………… 7 Landessprache. 9. EXPLODED DIAGRAM : BC-005 ……………………… 8 ・French : S'il vous plait, veuillez demandez á votre foumisseur de manuel instruction en langue locale. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY BEFORE OPERATION INSTRUCTIONS Inspect tool before use. ● Before using, check that screws are securely When using the tool, please observe the safety tightened, that any protective cover or guard is precautions below to prevent possible accident or securely in place, other parts are free from damage injury. -
Page 4: General: Pneumatic Tools
● When a label/nameplate gets damaged, worn or becomes missing, contact the sales agent through which you have purchased your tool or Nitto Kohki Co. Ltd, directly for a replacement. DISPOSAL When a tool is taken permanently out of service, it is ●... -
Page 5: Instructions For This Tool
● Before starting operation, turn on the throttle lever Package Contents check to start the motor, and press the countersink against BURR CUTTER BC-005 1set Chuck 10mm the workpiece to be machined. Chuck 8mm There are three types of available shank ●... -
Page 6: Air Supply
4 AIR SUPPLY 5 HOW TO OPERATE THE TOOL CAUTION WARNING Draw off drainage before starting operation. If Always wear safety glasses during operating the ● ● the drainage enters into the tool, it can freeze tool. Wear respiratory protection when working around the exhaust port of the tool and result in in an environment where dust particles are output power reduction. - Page 7 5-3. Attaching and detaching the Countersink CAUTION WARNING Exercise care not to allow cutting chips to ● Always disconnect the air supply hose from the enter the holder into which the chuck will be ● tool before adjusting the countersink. inserted.
-
Page 8: Storage
5-6. How to use 7 ORDERING SERVICE PARTS CAUTION For further operational and handling information or ● for replacement of parts and components, contact This tool is a push start type. ● the company from whom you purchased the tool or If the throttle lever is turned on with the countersink pressed against the workpiece or the countersink is an authorized dealer. -
Page 9: Exploded Diagram : Bc-005
9 EXPLODED DIAGRAM : BC-005 WARNING This diagram is for your reference only. Do not attempt to service or repair the Tool. Do not take the Tool apart. Contact an authorized Nitto dealer for all service and repair of the Tool. Improper service and repair can cause accidents and service injuries. - Page 10 Printed in KOREA TQ14328-0...
Need help?
Do you have a question about the BC-005 and is the answer not in the manual?
Questions and answers