Mounting And Placement - Master audio B Series B5A User Manual

3. CONNECTION PANEL (Passive cabinet)
A: 2-pin terminal block stereo INPUT connector: Connect the passive
speaker from the active speaker. IMPORTANT: Respect always the
polarity of the speakers to avoid out of phase audio performance.
Fig.2. B5A connection panel (passive cabinet)

4. MOUNTING AND PLACEMENT

For a proper installation of the speaker system, it is strongly
recommended to carefully read the following advices.
•
Connect only good quality cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated
noise-levels
•
Avoid interference from neighbouring electrical appliances
•
Position your B5A cabinets away from moisture, excessive
sunlight and dust
•
Choose the best location for your speakers. Experiment by placing
them in different locations before finally deciding the most suitable
location
A