Table of Contents
Advertisement
II and the Variax Workbench USB interface. A VDI cable or standard CAT 5 networking
cable are required in order to make a connection with another VDI-capable device. For
more information, see the manual of your VDI-compatible device.
MIDI
RackVax makes MIDI control possible for those with MIDI controllers, including foot
pedals and rackmount MIDI units, by adding MIDI input and output jacks to the original
Variax electronics. Additionally, RackVax can connect to the Line 6 Monkey and Variax
Workbench software via your computer's MIDI interface.
MIDI IN
Connect the MIDI IN jack to the MIDI output of your other MIDI-capable devices.
MIDI OUT
Connect the MIDI OUT jack to the MIDI input of your other MIDI-capable devices.
CUSTOMIZATION
Build a Custom Guitar
There are two banks named CUSTOM 1 and CUSTOM 2 which are at the beginning
and end of the MODEL knob, respectively. These positions can each be used to save five
customized instrument models and all their settings. There are two ways to do this. One
involves the Variax Workbench computer software and offers the most control, while the
other is more primitive and can be accomplished using only the RackVax itself.
RackVax Save Procedure
If you've adjusted a model to your liking and would like to save it to one of the custom
banks, here's how to do it:
1.
Pull out the
MODEL knob (gently) to start the save process.
PICKUP / SELECT knob to the position where you'd like to save your
2.
Change the
sound. (Moving the knob during saving will only change the save location, not the
sound.)
3.
Rotate the
MODEL knob to the custom bank of your choice (CUSTOM 1 or CUS-
TOM 2).
4.
Push the
MODEL knob back in.
The current settings are now saved in the position you selected.
- 11 -
Advertisement
Table of Contents
