OEM Tools PPS-I 24379 Operating Instructions And Parts Manual

Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
UNPACKING
After unpacking unit, inspect carefully
for any damage that may have occurred
during transit. Check for loose, missing,
or damaged parts. If any damage is
observed, a shipping damage claim
must be filed with carrier. Do not use the
OEMTOOLS Personal Power Source if
broken, bent, cracked or damaged parts
(including labels) are noted. Any Personal
Power Source that appears damaged
in any way, operates abnormally or is
missing parts should be removed from
service immediately. If you suspect
that the Personal Power Source was
subjected to shock load (a load that was
dropped suddenly, unexpectedly, etc.)
immediately discontinue use until it has
been checked by a factory authorized
service center.
WARNING
The following safety information is provided as guidelines to help you operate your Personal Power Source under the
safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe
handling instructions are not known or not followed. The following safety instructions are to provide the user with the
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use
of your service system. Failure to follow instructions listed below may result in serious injury. In addition, make certain
that anyone that uses the equipment understands and follows these safety instructions as well.
WARNING: Pursuant to California Proposition 65, this product contains chemicals known to the state of California to
cause cancer and birth defects or other reproductive harm. Wash hands after handling.
Explanation of Safety Signal Words
WARNING
: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION
: Used without the safety alert symbol indicates a potentially hazardous situation which, if
not avoided, may result in property damage.
Notes
: Provide clarity and helpful information.
03/16
2016 ©OEMTOOLS
PPS-I PERSONAL POWER SOURCE
WITH SMART JUMP CABLES
24379