Page 2
One. To Start( start up) 1. Press power button to start. 2. The computer enter power-on self-test and system guide 3. Enter Windows 10 interface, like picture below: Two Lay out (power off) 1. Click system tray bottom left logo 2.
Page 3
3. Click the “power off” when popup a dialog box, like below pitcture: Three Mouse operation The device provide joystick and mouse mode switch, when switch to mouse mode, you need slip the button to the middle. Like below: ...
Page 4
pages. L1 L2 is taken as left button of mouse R1 R2 is taken as right button of mouse How to adjust the mouse double click speed and pointer movi ng speed below: First step: double click the control panel, like below picture: ...
Page 5
The third step: Click right on the mouse icon, select “mouse setting”, start “mous e” attribute dialog box. The fourth step: adjust on the “speed” line.
Page 6
The fifth step: Click “Pointer Options” label, adjust pointer movement speed.
Page 7
Four Joystick operation GPD WIN support Dinput and Xinput two joystick modes, they matches Direct Input a nd Xbox Input mode. Switch Dinput mode Switch joystick mode to Dinput mode, need to move the button to left side, like below...
Page 8
The second step: click “check device and printer” The third step: right click joystick icon, choose “Controller for PC” ...
Page 9
The fourth step: Click the “attribute” when popup the dialog box The fifth step: When popup” Controller for PC attribute “dialog box, please press the cross button/joystick/shoulder button/function buttons to test the effectiveness.
Page 10
Switch to Xinput mode Switch joystick mode to Dinput mode, need to move the button to left side, like below picture: On how to test the effectiveness of the buttons is blow: The first step: double click the control panel...
Page 11
The second step: “Check device and printer” The third step: Right click joystick icon, click “Controller for Windows” ...
Page 12
The fourth step: Click the “attribute” when popup a dialog box. The fifth step: When popup a dialog box” Controller for Windows attribute”, pleas e press the cross button and joystick/shoulder button/function buttons to test the eff...
ectiveness. Use the keyboard The keyboard is a integrated highly QWERTY keyboard. The default output for first ro w is number keys. If you want to switch to F1-F12 button/ special character just need to press the Fn/Ctrl at the same time. PgUp/Home/PgDn/End and ...
Page 14
, press the Fn button to switch to PgUp/Home/PgDn/End modes. Six Networking operation The first step: Click the Wi-Fi logo on bottom right corner of the system tray The second step: Click to connect The third step: Input the pass words...
Page 15
The fourth step: When the system tray display , that means connect successfull Seven Connect to Bluetooth device operation The first step: Click the Start menu system...
Page 16
The second step: Click the setting The third step: When popup the “setting”, click the “device” icon.
Page 17
The fourth step: Click the “Bluetooth”, start the “manage Bluetooth device” The fifth step: If there is Bluetooth device within 10 meters around, the computer can recognize automatically, click and enter the passwords to finish Wi-Fi connecti...
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: GPD-WIN (FCC ID: 2AJQ5GPD-WIN) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the Wrist is 0.962W/kg and when properly worn...
Need help?
Do you have a question about the WIN and is the answer not in the manual?
Questions and answers