Storing The Strongest Broadcast Stations Sequentially; Digital Signal Processor; Introduction Of Dsp Adjustments - Pioneer SUPERTUNER 3 AVH-P5100DVD Operation Manual

Section
04 Available accessories
1 Touch LIST to display the preset list.
# When the touch panel keys are not displayed,
you can display them by touching the screen.
2 When you find a station that you want
to store in memory, keep touching one of
preset tuning keys P01 to P12 until the
beep sounds.
The next time you touch the same preset tun-
ing key the station is recalled from memory.
# To switch between P01 to P06 and P07 to P12,
touch PREV or NEXT.
3 Touch ESC to return to the ordinary dis-
play.
Note
You can also use a and b to recall stations as-
signed to preset tuning keys P01 to P12.
Storing the strongest broadcast
stations sequentially
1 Touch AV MENU and then touch
FUNCTION MENU to display the function
names.
2 Touch BSSM on the function menu to
turn BSSM on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM stops flashing.
# To cancel the storage process, touch BSSM
again.
3 Touch ESC to return to the TV picture.
# To return to the previous display, touch BACK.
Note
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
P01 to P12.
74
En

Digital Signal Processor

Introduction of DSP adjustments

You can use this unit to control multi-channel
processor (DEQ-P8000), which is sold sepa-
rately.
! Some functions may differ depending on the
multi-channel processor connected to this
unit.
Important
When a multi-channel processor and an optional
DVD player are connected to this unit, be sure to
use an optical cable (e.g. CD-AD600).
1 DSP display
Shows the DSP function names.
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.
1 Setting the speaker setting
2 Using the position selector
3 Auto TA and EQ (auto-time alignment and auto-
equalizing)
4 Adjusting the time alignment
5 Adjusting the speaker output levels using a
test tone
6 Selecting a cross-over frequency
7 Adjusting the speaker output levels
8 Adjusting 3-band parametric equalizer
1 Touch AV MENU and then touch
DSP MENU to display the DSP function
names.
The DSP function names are displayed and
operable ones are highlighted.