Jinruitai Electronics JT2678 User Manual

WATERPROOF BLUETOOTH SPEAKER USER MANUAL
Manufacturer: Shenzhen Jinruitai Electronics Company Limited
Model: JT2678
Thank you for choosing our Waterproof Bluetooth shower speaker. Sincerely
hope you will enjoy your music and phone call freely.
Safety Instructions
Read this manual carefully before you use our waterproof Bluetooth speaker
and keep this manual for future reference.
Keep the device away from heat, direct sunlight and sharp edges.
Keep the device away from naked flames.
Do not insert any metal objects into the device in case of short circuit!
To avoid a static charge, please do not use the device in an extremely dry
climate.
Do not repair the unit by yourself but contact an authorized specialist to help
you.
Accessories included
1pc USB charging cable
Charging Integrated Battery
This Bluetooth speaker is powered support by integrated rechargeable Lithium
Battery. Charge the battery as follows:
Insert the charging cable into the DC 5V socket on the unit. Connect the USB
plug into a PC or AC/DC adapter. The LED indicator turns red and the battery
is being charged.
When the battery is fully charged, the red LED indicator goes out.
Pairing BT06 to Mobile phone or other device
Active the Bluetooth speaker pairing mode by button and then there has a voice
reminder says: Enter to Bluetooth. the blue LED is flashing ,means the speaker
is ready for pairing.
Switch off the mobile phone Bluetooth, the speaker will say: Bluetooth
canceled.
Tips:
Please make sure the speaker is in power off mode when you are trying to
activate the pairing mode.
Turn on your mobile Phone and activate the Bluetooth function.
Search for Bluetooth devices, BT06 will show up.
Pair your device with BT06. If password is needed, type in "0000",after BT06
is paired with your device, voice reminder says; Bluetooth connected, means