Advertisement
Quick Links
Advertisement
Summary of Contents for B2 Audio BWF8
- Page 1 MODEL BWF8 BWF8 OWNER’S MANUAL www.b2audio.com...
- Page 2 BWF8 is built to give you the bass you desire when space is limited and it is best suited for BMW factory upgrade.
- Page 3 BWF8 is compatible with all BMW models that have the configuration “HiFi” or higher. To maximise the performance of this woofer, we are recommended to use 1*4 Channel amplifiers or 2*2Channel amplifiers. This subwoofer can be installed in the followng car models (Under the front seat).
- Page 4 In case of the factory subwoofer is glued, be careful not to damage the plastic enclosure which can be re used for the B2 audio BWF8. Factory subwoofer is under The comparison of factory The comparison of factory the cover, ready for the subwoofer and B2 audio BWF8.
- Page 5 MODEL EL602R 6.5" COAXIAL SPEAKER www.b2audio.com EL602R OWNER’S MANUAL...
-
Page 6: Specification
Introduction Specification Congratulations on your purchase of a B2 EL602R 2-way coaxial component speaker system. Part Number BL602R EL602R 2-way coaxial speakers deliver solid performance, superior linearity, System Impedance efficiency, and great bass response. Upgrade to B2 speakers and hear the Power Handling (RMS) 60Watts perfect balance of power and control. - Page 7 MODEL BSW8 BSW8 OWNER’S MANUAL www.b2audio.com...
- Page 8 Thank you for choosing BSW8. To get the most from your subwoofer, please be sure to read all the instructions thoroughly and keep BSW8 them where they will be read by all who use the product. BSW8 is built to give you the bass you desire when space is limited and it is best suited for BMW factory upgrade.
- Page 9 To maximise the performance of this woofer, we are recommended to use 1*4 Channel amplifiers or 2*2Channel amplifiers. This subwoofer can be installed in the followng car models (Under the front seat). Replace the factory subwoofer by B2 audio BWF8 and re tighten the screws.
- Page 10 The installation of BWF8 and BSW8 is the same, therefore we took a BWF8 for example. In case of the factory subwoofer is glued, be careful not to damage the plastic enclosure which can be re used for the B2 audio BWF8.