1. Getting Started Thank you for purchasing Prestigio DataRacer II , a stylish HDD Enclosure with ultimate performance. You have made an excellent choice and we hope you will enjoy all of its capabilities. The product offers a new concept of mobile data storage which features safety and user friendliness.
Administrator Free hard disk space – no less than 32 MB 1.3 Package Content Description Quantity Prestigio DataRacer II Main Unit 25cm USB Cable 60cm USB Cable 60cm eSATA Cable Stylish Leather Case Quick Guide and Yellow Serial Key Sticker...
USB cable to its appropriate USB port. The power is provided through USB port in eSATA mode. Slide power switch bar to ON position to turn on device. When correctly connected, a Prestigio DATARACER II icon will be displayed in the file...
manager window. NOTE eSATA compatibility may vary depending on user’s hardware configuration and operation system. Some eSATA controllers may require system reboot process to be able to recognize the new device. The device is set up that eSATA connection as first priority of data transmission mode.
Page 8
USB device when the LED flashes quickly. Do NOT remove the USB device at this moment. Violation may cause data loss or even damages to the Prestigio DataRacer II . Warning: If you do not follow the safe removal procedures on Windows, Windows XP and Windows Vista operating systems, data loss may occur due to “write cache”...
Please back up all critical data including TurboHDD USB Software installation files before installing software. In case of software data loss or corruption, please refer to http://www.prestigio.com/product/downloads software downloading service. Connect Hard Disk Enclosure device with PC with USB cable provided.
Cancel button to stop process. After the software installation is successfully completed, Please remove DataRacer II and reconnect it to your PC again. Upon successful installation and activation, TurboHDD software interface will pop up automatically.
Click on desktop shortcut “TurboHDD USB” or click on Start Program Files “TurboHDD USB” “TurboHDD USB” to initiate software. Upon entering the main menu, detailed information of Hard Disk Enclosure is displayed at the bottom of the interface. The software is set at Turbo mode by default.
Click on Yes button to confirm removal or No button to cancel action. The USB cable image is now disconnected from “hard disk” image. The hard disk is safely disconnected from PC. To execute the software again, simply physically disconnect the hard disk enclosure and connect it to PC again.
Select desired software language from the drop down text box. 3.5 Others Up to 2 USB HDD enclosures can be supported and accelerated by the software. Simply click on icons to toggle between 2 USB HDD enclosures. Click on About icon to read about software information.
We made every effort to ensure that the information and procedures in this user manual are accurate and complete. No liability can and will be accepted for any errors or omissions. Prestigio reserves the right to make any changes without further notice to any products herein.