Installing Batteries - Minolta PROGRAM FLASH 2500 Instruction Manual

INSTALLING BATTERIES

The 2500 (D) may be powered by :
• Four AA-size alkaline batteries
• Four AA-size lithium batteries
• Four AA-size rechargeable nickel-metal hydride (Ni-MH) batteries
Only charge nickel-metal hydride batteries in an appropriate
charger unit.
1. Open the battery-chamber door as shown.
2. Insert the batteries as shown
3. Close the battery-chamber
10
in the diagram in the battery
chamber.
door.
When the flash is charged and ready,
the ready lamp at the rear of the unit
glows.
When the flash charging time exceeds
30 seconds, replace the batteries.
11