Vestil WT-2424 Owner's Manual page 2

Securely prop up one end of the carts frame high enough for the casters to fit underneath that end. You will see four
caster mounting brackets welded to the bottom of the carts frame, one at each corner.
If you have both swivel and rigid casters, the casters are to be mounted in adjacent pairs. Typically, the swivel casters
are mounted to the side on which the push handle is located (when applicable). Determine the proper locations for the
casters before you begin.
Turn the included machine screws a couple of threads into the two threaded holes in the ends of each of the caster
mounting brackets.
To install the casters onto the cart:
Insert either of the short sides of the caster's top plate into the curled end of the caster mounting bracket.
Raise the other end of the caster's top plate up into the mounting bracket, and secure it there by screwing in the
machine screws completely. The screws should extend underneath the caster's top plate, thereby retaining it in the
bracket.
2
CASTER INSTALLATION INSTRUCTIONS