App Introduction - Blaupunkt HOS 1800 User Manual

English | 3
4. Wi-Fi Setting
4a.
Advanced
4b. The Camera will offline for around 40 seconds to reboot for Wifi connection. When camera
connects to Wi-Fi router correctly, the Green LED will stay ON.
4c. In the Wi-Fi setting on your smart device again, make sure the Wi-Fi router you are connecting
to is the same as the camera. If not, manually assign to it.
Note:
If you fail to add the camera for several times, please press and hold the "Reset" button for 5 seconds to reset it.
Then follow steps 3a or 3b again.
Setup sensor PIR/MAG
Add Sensor Device
(1) Tap then choose
(2) In the advanced section, enter admin password default 123456.
(3) Select sensor setup, tap "+" to add sensor device.
(4) Name your device and tap"Save".
(5) Tap "Camera Pan control" to calibrate the camera position, and save the settings
(1) (1)-1
Enter Admin Password
(3)-1
Carrier 9:41 AM 75%
Back Sensor Setup Back
Add Sensor
Enter Admin Password
(default 123456)
Choose the appropriate Wi-Fi
router on your local network
(3)
(2)
Advanced
(default 123456)
(4) (5)
Carrier 9:41 AM 75%
Carrier 9:41 AM 75%
Sensor Edit Save Cancel Trigger Preset Save
Sensor Name:
Front Door
- Make sure camera & sensor are in xed position.
- Slide to position camera angle.
- Tap "save" to save setting and exit.
Trigger Preset
Reset
Delete
Position your camera & sensor
Event Trigger Auto-Position
- When an intruder is detected, the camera can immediately and automatically position itself to
capture video image of the intruder as evidence. With every event, the camera will immediately
send out push notifications to your mobile device.
- If you move or relocate the camera, please recalibrate the camera position again.
Mag
Camera rotate
to the scene

APP introduction

Camera List
Live View
Information
Refresh
Camera Setting
Add Camera
English | 4
PIR
Live-View
Arm/Disarm
Snapshot
Mute
Video Record
Setup Camera Position
Return
Talking Button