Sleepmasters UBRICPH-BD60 Assembly Instructions

180cm rochelle bedstead

Advertisement

Quick Links

Regrettable self assembly items cannot be returned once assembly is part or fully completed unless
the items are found to be faulty. Should you need to return the unassembled product, please repack
in its original packaging.

Important information

Please note this range has a rustic and reclaimed oak effect finish. Slight variations in the finish
including marks, rounding of edges and small holes are a deliberate part of the production process
and not manufacturing faults.
We suggest you spend a short time reading through this leaflet and then follow the simple
step-by-step instructions.
Carefully check that you have all the parts before beginning assembley.
Keep fittings out of children's reach and keep children well away from construction area.
We suggest you retain these instructions for future reference.

Product information

Product finish: FOC-9063 FOC-9064
Product conforms to BS EN 1725:1998

Care instructions

Avoid exposing the furniture to exccessive heat or direct sunlinght as this can cause cracking and
deterioration of the colour.
Periodically dust lightly with a clean soft cloth.
Do not use silicone based furniture polish.
Any spills should be removed immediately with a damp cloth.
Wood will mellow and change colour over time, we recommend that ornaments and items placed on
the surface are moved regularly to prevent uneven mellowing.
Take care when moving the furniture and never drag the pieces across the floor as this will cause
damage to the joints.
180CM ROCHELLE BEDSTEAD
SKU: UBRICPH-BD60
Assembly instructions
Please keep these instructions for future reference.
Page 1 of 5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UBRICPH-BD60 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sleepmasters UBRICPH-BD60

  • Page 1 180CM ROCHELLE BEDSTEAD SKU: UBRICPH-BD60 Assembly instructions Please keep these instructions for future reference. Regrettable self assembly items cannot be returned once assembly is part or fully completed unless the items are found to be faulty. Should you need to return the unassembled product, please repack in its original packaging.
  • Page 2 CARTON(A) Hardware Pack in Carton C Code Component M6*40L 4*30L A 1x B 3x C 6x Headboard CARTON(B) CARTON(C) Code Component Code Component Foot Board Slats Center Support Legs Side Rails Center Support Page 2 of 5...
  • Page 3 Step 1 Please Note Only Loosen Nuts. DO NOT Remove Them Fully. Step 2 Page 3 of 5...
  • Page 4 Step 3 Step 4 Page 4 of 5...
  • Page 5 Step 5 Step 6 Page 5 of 5...

Table of Contents