Siemens RUGGEDCOM ROS v4.3 User Manual page 51

RUGGEDCOM ROS
User Guide
1
2
3
Figure 7: Console Interface (Example)
1. System Identification 2. Menus 3. Command Bar 4. Menu Name 5. Alarms Indicator
NOTE
The system identifier is user configurable. For more information about setting the system name, refer
to Section 4.1, "Configuring the System Information"
Navigating the Interface
Use the following controls to navigate between screens in the Console interface:
Enter
Esc
Configuring Parameters
Use the following controls to select and configure parameters in the Console interface:
Up/Down Arrow Keys
Enter
Esc
Using the Console Interface
Select a menu item and press this Enter to enter the sub-menu or screen beneath.
Press Esc to return to the previous screen.
Use the up and down arrow keys to select parameters.
Select a parameter and press Enter to start editing a parameter. Press Enter again to commit the change.
When editing a parameter, press Esc to abort all changes.
4
.
Chapter 2
Using ROS
5
35