Hardware; Component Layout; Connector And Jumper Settings - Philips PC-Link Manual

2.

HARDWARE

2.1.

COMPONENT LAYOUT

2.2.

CONNECTOR AND JUMPER SETTINGS

J2 DC Jack and J1 blue terminal are connectors for power supply input, whilst
J12 blue terminal functions as voltage output from regulator.
J1
Pin Name
1
2 6.5-12VDC Connected to power supply input (6.5-12 volt)
J12
Pin Name
1
2 5VDC
DC Jack Polarity
GND Ground reference for power supply input
GND Ground reference for power supply output
Voltage output from regulator (±5.1 Volt)
Function
Function
4