User Manual Charger Unit SKL02 NORCELL Sorgenfriveien 9 7037 TRONDHEIM NORWAY Tel: +47 958 07 800 E-mail: post@norcell.com...
Page 2
Specifications – Charger Unit SKL02: Electrical safety: EN 60601-1, EN 60950, EN-60335-2-29 EMC standards: Medical: EN 60601-1-2 Emission: EN 61000-6-3 Immunity: EN 61000-6-1 Protection: Input: Fusible resistor Output: Polyswitch fuse against reversed polarity ÷20 to +40 °C Temperature range: Input:...
Page 3
By mains "ON" or connection/disconnection of battery. The restart identification time is 10-15 seconds. Discharge function: No. NiMH cells have negligible memory effect. See also specifications for batteries or Norcell Maintenance Guide. Charging time: Battery SK1209D: 5 hrs Battery SK1218D: 10 hrs Use: Indoor use only.
• Do not charge battery at ambient temperatures below 0°C. After using the battery at temperatures below 0°C, let the battery rest min. 1 hour in room temperature before charging to avoid damage ! Norcell SKL02 and SKL03 chargers with Norcell 3-pin output plug (standard) are programmed to take care of this and starts charging automatically when the cell temperature is proper.