1. Scope of Application engine. Model LS 3500 does not have a wheel drive, model LS 5000 features a wheel drive. The (The digits in text correspond to the item num- working width is 80 cm. A hand lever (27) is provi- bers on spare part list.) ded on the steering handle to adjust the suction height of the nozzle (3).
completely stopped. The engine ignition lever refer to the attached instructions of Honda. should be set to »0« position so that the engine The suction power of the rotor (51) is largely depen- cannot be started accidentally. In addition, the dent upon the height of the suction nozzle, (3) i.e.
the attached instructions of Honda. distance again, loosen shaft bearings (42) and turn bearings (42) in slot. Tighten screws carefully. All bearing points of the foliage vacuum have self- The air filter of the drive engine should be clea- lubricating ball bearings and do not have to be lubri- ned or washed out frequently because handling cated.
Need help?
Do you have a question about the LS3500 and is the answer not in the manual?
Questions and answers