Bluetooth - Pantech C790 User Manual

Open WLAN and connect to a wireless network
1. Press the home-> menu, and then touch Settings-> wireless and network.
2. Select WLAN check box, to unlock WLAN. Mobile phone will automatical
3. Touch WLAN Settings. Then WLAN network list will show to locate the WLAN
the network of the name and security Settings (open network or with WEP,
WPA/WPA2 encryption). If enabled WLAN set of network notice, to find a cell
phone in the open wireless network can be used in the status bar shows was locked
4. Touch one WLAN network to connection. When you select open network, mobile
phone will be connected to the network. If selected is WEP, WPA/WPA2 encryption
network, it must first corresponding input password, and then the touch connection.

2.23. Bluetooth

By default, the phone's Bluetooth feature is turned off. Please start to use Bluetooth
headset Bluetooth on your phone。
Power: use this switch to activate the Bluetooth feature on or off。
—
— Visibility: as needed, select the turn on/off this machine can be search
options。
— My device: by searching for a new device can automatically search for
Bluetooth devices, and on the handset screen displays the device name,
mobile phone prompts matching settings。
— Search audio device: this feature phones will automatically find the
surrounding from. (Typically, password is 0000 by default Bluetooth headset,
please see the Bluetooth headset user instructions)。
—My name: you can customize the machine's name。
— Advanced Options
- Audio path：
（1）Left on the phone: when you select this item, call only when using a
mobile phone, you can't use Bluetooth headset。
（2）Go to the device: Select this item, the call can only be used when the
Bluetooth headset, not using a mobile phone。
- Storage：
Receiving file storage directory of mobile phone or storage card。
—My address: displays the Bluetooth device address。
13