Table of Contents
Related Manuals for Bittel HWDCD9888(38)TSD
Summary of Contents for Bittel HWDCD9888(38)TSD
-
Page 1: Cordless Phone
BITTEL HWDCD9888(38)TSD Cordless phone USERS MANUAL Please read this manual before use. We bring good things to Hotel/Motel _______________________________________________________________________ _BITTEL Page 1 of 13 HWDCD9888(38)TSD... -
Page 2: Unpacking Your Phone
Thank you for purchasing the NEW Bittel product. Read following carefully before using this product First, Battery Installation: Before using this product, install the chargeable battery into the handset ( Named Handset for short) . Open the battery box which locates under the back of phone , insert the battery into the right socket inside and put the cover then fixing it with the screws attached. -
Page 3: Main Features
LINE---Through 4-pins line to connect telephone DC6V--- Connect power adapter PHONE--- Through 4-pins line connect to TEL Port Note：Must not insert to DATA PORT. _______________________________________________________________________ _BITTEL Page 3 of 13 HWDCD9888(38)TSD... - Page 4 On hook mode for registering the device. 17. Hold key –Places a caller on hold with LED indicator. ON HANDSET : 18. Ringer/ Hold L indicator 19. ON key -- Make the device on working mode. _______________________________________________________________________ _BITTEL Page 4 of 13 HWDCD9888(38)TSD...
- Page 5 Then Insert the line from PBX to LINE port of RJ11 box (2), At last , connect a 4-pins line from PHONE port of RJ11 box to the TOTEL port of the telephone . _______________________________________________________________________ _BITTEL Page 5 of 13 HWDCD9888(38)TSD...
- Page 6 2. On-hook To finish the current calling , following the two way listed below: 1) If in SPKR mode, just press the SPKR key on base , 2) Press the OFF key on handset, _______________________________________________________________________ _BITTEL Page 6 of 13 HWDCD9888(38)TSD...
- Page 7 UP/DOWN-SET –UP/DOWN-SET . Press [SET] key to confirm the delete. LCD display OK when finished. On-hook mode, press [UP]or [DOWN] key to viewing in-coming calls , press[DEL] key to delete the , LCD display OK when finished. _______________________________________________________________________ _BITTEL Page 7 of 13 HWDCD9888(38)TSD...
- Page 8 SET key to confirm. d. Setting FLASH time: On-hook mode, press [SET] key , then press FLASH key to set flash time .Press digits (1—9,0,*,#) Then press [SET] key to confirm , factory default: 600ms. _______________________________________________________________________ _BITTEL Page 8 of 13 HWDCD9888(38)TSD...
- Page 9 Detail as below : The base in On –hook mode , press[SET] key first, then press UP/DOWN key to find DEREGISTER, and press [SET] key again , LCD display “ ERASE” , then _______________________________________________________________________ _BITTEL Page 9 of 13 HWDCD9888(38)TSD...
-
Page 10: Matters Need Attention
Battery low need recharge again. No voice or not off-hook Check the telephone line connect in good condition or not Handset indicator light Lower battery of the handset , put to base and recharge again. _______________________________________________________________________ _BITTEL Page 10 of 13 HWDCD9888(38)TSD... -
Page 11: Warranty
This product is warranted for a period of 12 month from the date of purchase against faulty materials or workmanship. If during this period a defect arises, we may repair or replace the product, at Bittel’s discretion, provided that: 1) The product has not been used for any purpose other than normal use, 2) Unauthorized product repair or modifications have not been attempted. - Page 12 SAR value for later products, in all cases, products are designed to be within the guidelines. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site: http://www.phonefacts.net _______________________________________________________________________ _BITTEL Page 12 of 13 HWDCD9888(38)TSD...
- Page 13 THIS LIMITED WARRANTY GIVES THE BUYER SPECIFIC LEGAL RIGHTS. THE BUYER MAY ALSO HAVE OTHER RIGHTS WHICH VARYFROM JURISDICTION TO JURISDICTION. This warranty is only valid for merchandise purchased directly from Bittel or from dealers or distributors Bittel Co. authorized. CONTACTING BITTEL...
Need help?
Do you have a question about the HWDCD9888(38)TSD and is the answer not in the manual?
Questions and answers