Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Arecont Vision HGS2
- Page 1 Arecont Vision HSG2 Installation Manual 0 | P a g e...
- Page 2 Image 1 Image 3 Mounting the Camera: Use the provided screw, flat washer and spring washer to attach Arecont Vision Remove HSG2 housing and hardware from MegaVideo® cameras on the tray shown in the box. Image 4-1 and Image 4-2.
- Page 3 Arecont Vision HSG2 Installation Manual Image 5 Remove the silicone cap from the housing, cut the side part (if necessary) (Image 6) to run the RJ45 cable, external power and digital in/out cables through the silicone cap. Insert the provided rubber plugs to cover...
- Page 4 Arecont Vision HSG2 Installation Manual DC12V Input Power Source Switchwer PoE Data Input PoE Data Output Image 9 Run Ethernet cable, external power cable (if Use the provided RJ45 cable to connect ® necessary) and digital in/out cables (if Arevont Vision’s MegaVide camera to the necessary) through the hole of HSG2 housing HSG2 PoE data output.
- Page 5 Arecont Vision HSG2 Installation Manual HSG2 Wall Mount (HSG2-WMT) Installation Instructions Inside the box: Wall mount Pack of four (4) wood screws and four (4) dry wall anchors C. Two-sided Hexagonal Wrench Not included but needed: #2 Phillips head screwdriver C ...
- Page 6 Arecont Vision HSG2 Installation Manual HSG2 Junction Box Adapter (SV-JBA) for MD-WMT2 Installation Instruction Caution: Use of SV-JBA is recommended for outdoor installation on hard surfaces requiring external conduit. Inside the box: Junction Box Adapter Pack of four (4) machine screws C.
- Page 7 Arecont Vision HSG2 Installation Manual HSG2 Pole Mount Adapter (MD-PMA) Installation Instructions Inside the box: Pole Mount Adapter Attach the wall mount to pole mount adapter 2x Compression Fittings as shown in Image 16. C. 2x Small Steel Straps Use the supplied two large or small steel D.
- Page 8 Arecont Vision HSG2 Installation Manual HSG2 Corner Mount Adapter (MD-CRMA) Installation Instructions Inside the box: Run the Ethernet cable and outside power cable (if necessary) through the compression Corner Mount Adapter fittings. 2x Compression Fittings C. Pack of four (4) machine screws Attach Wall Mount Adapter to Corner Mount D.
- Page 9 Arecont Vision HSG2 Installation Manual 8 | P a g e...
Need help?
Do you have a question about the HGS2 and is the answer not in the manual?
Questions and answers