ION DashCam Quick Start Manual page 6

4 Wide Angle Lens
5
6
7 LED Indicator
8
9
10 Display
11 MicroSD Slot
12 Reset Button
13 Speaker Vent
Capture a wide angle view.
1. Select the top-left on-screen command.
2. Enter the playback mode.
3. Move up the selection bar or move to former file.
1. Select the bottom-left on-screen command.
2. Move down the selection bar or move to next file.
3. Take a photo.
Operation status indication.
1. Confirm your selection.
2. Manually trigger an Event Protection Video Recording.
3. Select the bottom-right on-screen command.
1. Turn on or off the DashCam by pressing and holding the button.
2. Select the top-right on-screen command.
3. Enter the setup menu.
4. Go back to previous interface.
Sharp panel for live view, playback and function indications.
MicroSD card storage location.
Reset the DashCam.
Output the sound.
EN-6