User Servicing Instructions; Care And Maintenance - Holiday Living W14L0099 Manual

4. Insert the top section (A) into the middle section (B).
Rotate the top section (A) slightly to ensure it matches
the middle section (B) and proper circuit connection if
lights are not functioning
Plug electrical cord into a properly grounded outlet.
This tree comes with an on/off foot pedal switch for
easy illumination.

USER SERVICING INSTRUCTIONS

Replace the lamp.
Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.

Remove the reflector of the bulb (Fig. 1).

Pull bulb straight out of socket. Do not twist bulbs (Fig. 2).

Replace burned-out bulb with 3.0 volt, 0.06 watt LED bulb ONLY. Directly insert the LED bulb into the lampholder

(Fig. 3).
Insert the reflector into the bulb (Fig. 4).

If the bulb doesn't light up, change the LED bulb's direction to insert into the lampholder (replacement bulbs are

provided) (Fig. 5).
Fig. 1

CARE AND MAINTENANCE

Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire

insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
When storing the product, carefully remove the product from wherever it is placed to avoid any undue strain or

stress on the product conductors, connections, and wires.
When not in use, store neatly in a cool, dry location protected from sunlight.

Fig. 2 Fig. 3
4
Fig. 4
5
Fig. 5