Table of Contents 1.Appearance 8. Customized settings 8.1 Wireless operation and network 2. Getting started 8.2 Sound 2.1 Charging the battery 8.3 Display 2.2 Using a Micro SD card 8.4 Location & security 2.3 Hot plug of Micro SD card and 8.5 Application external flash disk 8.6 Accounts &...
Thank you for your understanding in this respect! 2.1 Charging the battery A battery is embedded in your Digix tablet, which should be charged whenever the power is low. Power adapter: To charge the battery, insert one end of the adapter into the outlet and the other end into the power jack on the device.
2.You can also use the handheld tablet when the battery in it is being charged. Note: It takes longer to charge the battery fully when the tablet is powered on. 2.2 Using a Micro SD card Inserting Micro SD card: Place the Micro SD card into the groove and press it with a finger till you hear the sound of...
2.6 Wi-Fi Settings 1. Select settings on home screen shortcut. 2. Select "wireless & network" in the settings menu. 3. Select "WI-FI settings" to set the WI-FI network. 4. All APs found by the device will be listed. You can click the AP name to be connected.
WI-FI signals, the state of Ethernet and how much of the battery is left. 4.2 Home page The home page of your Digix tablet consists of two modes: Gadget Mode and Icon Mode. The two modes can be toggled through the button at the middle of the shortcut bar.
To enter the interface of application icons, click the button at the shortcut bar, as shown below: To enter the interface of Gadget Mode, click 4.3 Shortcut mode In the main interface of the Gadget Mode, you can press the menu button or click the icon Menu at the status bar.
4.4 Shortcut way to add gadgets To add the widgets to the main screen, press Menu Widgets in the gadget mode interface. And then select the widget you want to add. Once added, you can click the shortcut icon to perform the related operations.
6. Typical applications 6.1 Email Click the email icon , you can enter the email interface, where you can perform the operations below: 1. Set the account for the email. 2. Write new emails. 3. Send and receive the emails. 4.
Press the files and your file is selected, then you can use Copy, Cut, Paste, New, Rename, Delete as shown below: Installing files If you want to install files in explorer, you only need to click the installation files with an extension name “APK”. At that time, a prompt window will pop up, and then you can select install to install the file into the device.
Need help?
Do you have a question about the TAB-720 and is the answer not in the manual?
Questions and answers