Remote Control; Magic Remote Control Functions - LG LM6200 series Owner's Manual

Magic Remote Control Functions

When the message "Magic remote control battery is low. Change the battery." is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
and ends to the label inside the compartment, and close the battery cover. Be
sure to point the remote control at the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
CAUTION
y
Do not mix old and new batteries, as this may damage the remote control.
Make sure to point the remote control at the remote control sensor on the TV.
Turns the TV on or off.
Returns to the previous level.
Selects menus or options and confirms
Scrolls through the saved channels.
If you press the navigation button while
moving the pointer on the screen,
the pointer disappears, and the Magic
remote control works as a regular
To display the pointer again, shake the
Magic remote control from side to side.
Uses for viewing 3D video.
(POWER)
BACK
BACK
Wheel (OK)
your input;
VOL

remote control.

3D
2
1
3
Pointer (RF & Bluetooth transmitter)
Blinks the light when operating.
HOME
HOME
Accesses the Home menu.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
+ VOL -
CH
Adjusts the volume level.
^ CH v
Scrolls through the saved channels.
(MUTE)
MY APPS
Mutes all sounds.
MY APPS
Shows the list of Apps.
(Wheel) on the Magic remote
If you press
control, the following screen appears.
1
Shows information about the current program
and screen.
If you press (Wheel) on the Magic remote
control, the following screen appears.
2
Set the channel you want.
You can press the CH button on the remote
control to set the channel.
If you move the Magic remote control to the
3
bottom of the screen.
You can select Quick Menu.
29
REMOTE CONTROL