Shutdown And Hardware Reset; Navigating On The Screen - Mio Moov User Manual

Shutdown and Hardware Reset

Occasionally, you may need to perform a hardware reset when your Mio
stops responding; or appears to be "frozen" or "locked up."
You can perform a hardware reset by shutting down your Mio and then
turning it on. To shut down your Mio, slide the power switch to the
position. To turn on your Mio after shutting it down, slide the power switch
to the middle position.

Navigating on the Screen

To operate your Mio, touch the screen with your fingertip. You can perform
the following actions:
Tap
Touch the screen once with your fingertip to open items or select
onscreen buttons or options.
Drag
Hold your fingertip on the screen and drag up/down/left/right or across
the screen. (This is not supported by all applications.)
Tap and hold
Tap and hold your fingertip until an action is complete, or a result or
menu is shown. (This is not supported by all applications.)
For instructions on using the software, see the other manual supplied with
your Mio.
6