Page 1
060-2360-6 ELECTRIC HEDGE TRIMMER IMPORTANT: INSTRUCTION Read and follow all safety rules and operating instructions before using MANUAL this product.
Page 2
060-2360-6 | contact us 1.877.888.3872 this product carries a one (1) year warranty from the date of purchase against defective parts and workmanship. the warranty does not cover damage due to mishandling or abuse. Proof of purchase is required. if the hedge trimmer is used for commercial or rental purposes, this warranty only applies for 90 days from the date of purchase.
taBLE of ContEntS important Safety instructions Symbols Electrical Know your Hedge trimmer assembly operation maintenance troubleshooting Exploded View Parts List...
060-2360-6 | contact us 1.877.888.3872 SaVE aLL WarninGS anD inStrUCtionS will increase the risk of electric shocks. for fUtUrE rEfErEnCE • Do not abuse the cord. never use the cord for carrying, pulling or unplugging the the term “power tool” in all of the warnings power tool.
Page 5
key left attached to a rotating part of the • Store idle power tools out of the reach of power tool may result in personal injury. children and do not allow persons unfamiliar with the power tool or these instructions •...
060-2360-6 | contact us 1.877.888.3872 HEDGE trimmEr SafEty WarninGS electric shock. • Keep cable away from cutting area. Use both hands when operating the • During the operation, the cable hedge trimmer. Using one hand could may be hidden in shrubs and can be cause loss of control and result in accidentally cut by the blade.
Symbol name Designation/Explanation Volts Voltage amperes Current Hertz frequency (cycles per second) Watts Power minutes time alternating Current type of current Direct Current type or a characteristic of current Class ii Construction Double-insulated construction to reduce the risk of injury, users must read and understand operator’s read the operator’s manual manual before using this product.
Page 8
060-2360-6 | contact us 1.877.888.3872 the following signal words and meanings are intended to explain the levels of risk associated with this product. Symbol Signal meaning indicates an imminently hazardous situation, which, if not avoided, will DanGEr result in death or serious injury.
DoUBLE inSULatED this hedge trimmer has a plug that looks like the one shown in fig. 1. the hedge trimmer is double insulated to provide a double thickness of insulation between you and the tool’s electrical system. all exposed metal parts are isolated from the internal metal motor components with protective insulation. 1) 2-prong plug 2) Properly grounded extension cord Fig.
Page 10
060-2360-6 | contact us 1.877.888.3872 GUiDELinES for USinG EXtEnSion CorDS USE tHE ProPEr EXtEnSion CorD. make sure your extension cord is in good condition. When using an extension cord, be sure to use one of heavy enough gauge to carry the current your product will draw.
Page 11
the safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before using this product, familiarize yourself with all operating features and safety rules. (See fig. 2) CorD rEtainEr a convenient cord retainer helps keep the extension cord connection secure during trimmer operations.
060-2360-6 | contact us 1.877.888.3872 UnPaCKinG this product requires assembly. • Carefully remove the product and any accessories from the box. make sure that all items listed in the packing list are included. • inspect the product carefully to make sure no breakage or damage occurred during shipping.
Page 13
ConnECtinG to PoWEr SUPPLy this product is designed with a cord retainer that prevents the extension cord from being pulled loose while using. • form a loop with the end of the extension cord. • insert loop portion of extension cord through opening in the bottom of the rear handle and place over cord retainer.
Page 14
060-2360-6 | contact us 1.877.888.3872 StartinG tHE HEDGE trimmEr (SEE fiG. 3–4) • attach an extension cord to your hedger. • Place one hand on the trigger handle (1). Place the other hand on the auxiliary handle (2).
CUttinG tiPS • When operating the hedge trimmer, keep the extension cord behind the trimmer. never drape it over the hedge being trimmed. • Do not force the hedge trimmer through heavy shrubbery. this can cause the blades to bind and slow down.
060-2360-6 | contact us 1.877.888.3872 oPEratinG tHE HEDGE trimmEr • always hold hedge trimmer with both hands when operating. Use a firm grip on the handles. the unit is used for cutting in either direction in a slow, sweeping action from side to side.
GEnEraL maintEnanCE avoid using solvents when cleaning plastic parts. most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. WarninG! WHEn SErViCinG, USE onLy iDEntiCaL rEPLaCEmEnt PartS. USE of any otHEr PartS may CrEatE a HaZarD or CaUSE ProDUCt DamaGE.
Page 18
060-2360-6 | contact us 1.877.888.3872 CLEaninG tHE HEDGE trimmEr • Stop the motor and disconnect from the power supply. • Clean dirt and debris from the body of the hedge trimmer using a damp cloth with a mild detergent.
Page 19
ProBLEm PoSSiBLE CaUSE SoLUtion 1. Cord not plugged in. 1. Plug in cord. Unit will not start. 2. Cord or switch is damaged. 2. Have cord or switch replaced. motor runs, but Hedge trimmer damaged. cutting blades do Call for technical service. Do not use hedge trimmer.